mcarterbrown.com  

CCM Chipley Machine

Reply
 
Thread Tools Search this Thread
Old 11-10-2012, 09:24 AM   #1 (permalink)
MCB lurker.
 
killjoywarrior's Avatar
 
Join Date: Jul 2011
Location: Western Wisconsin

CCM S6 farting

So I relubed the reg and all that stuff, but to get a piece out I had to take out the pressure adjustment screw. Once I finished up and screwed the pressure adjustment screw in to around where I thought it was I aired it up and dry fired it a couple times, leading to some pretty obvious farting.

Is it related to the reg not being sweetspotted or what?
killjoywarrior is offline   Reply With Quote
Old 11-10-2012, 10:02 AM   #2 (permalink)
uncanny
 
paintballedbackin88's Avatar
 
Join Date: Dec 2011
Location: Los Angeles

AKA Fan
The reg pressure might be low, especially if it wasn't farting previously and you haven't changed any springs.
__________________
"A good reputation is more valuable than costly perfume. And the day you die is better than the day you are born." Ecclesiastes 7:1

mcb feedback
Customcockers.com feedback
Mostly mechanical autocockers
paintballedbackin88 is offline   Reply With Quote
Old 11-10-2012, 10:40 AM   #3 (permalink)
Six Point Five
 
ves206's Avatar
 
Join Date: Sep 2011
Location: joliet illinois

Set reg screw in flush.. 2 turns in from flush. Should be close to 300psi input.. try thst
__________________
play pump.......
Fox Paintball. Millington, Il.


http://www.mcarterbrown.com/forums/f...-feedback.html
ves206 is online now   Reply With Quote
Old 11-10-2012, 12:50 PM   #4 (permalink)
MCB lurker.
 
killjoywarrior's Avatar
 
Join Date: Jul 2011
Location: Western Wisconsin

I use a CP reg, so I'm pretty sure it's different than the CCM reg.

I already know all about the tuning, I have to adjust pretty much everything since it wasn't that tuned when I got it.

Last edited by killjoywarrior; 11-10-2012 at 12:56 PM.
killjoywarrior is offline   Reply With Quote
Old 11-10-2012, 01:38 PM   #5 (permalink)
On Wife Support
 
PsychoDad's Avatar
 
Join Date: Dec 2008
Location: Tinley Park, Il

I tried a CP low pressure reg on mine, but it wouldn't put out enough psi. Make sure your reg is putting out at least 300.
PsychoDad is offline   Reply With Quote
Old 11-11-2012, 12:49 AM   #6 (permalink)
Active Member
 
Rotozip2's Avatar
 
Join Date: Aug 2012
Location: St. Louis

CCM Fan
Cp regs are about three turns out from flush for 300 psi.
Rotozip2 is offline   Reply With Quote
Old 11-11-2012, 08:54 AM   #7 (permalink)
MCB lurker.
 
killjoywarrior's Avatar
 
Join Date: Jul 2011
Location: Western Wisconsin

flush is all the way in or all the way out? I've always thought it was out
killjoywarrior is offline   Reply With Quote
Old 11-11-2012, 09:36 AM   #8 (permalink)
Seasoned Member
 
Join Date: Dec 2011
Location: Texas

Manners count.

Flush is when the adjustment screw or IVG is flush with the bottom of the reg or the back of the body.
__________________
Feedback
Nation

Last edited by Fluff; 11-11-2012 at 11:16 AM.
Ashton S is offline   Reply With Quote
Old 11-11-2012, 10:09 AM   #9 (permalink)
MCB lurker.
 
killjoywarrior's Avatar
 
Join Date: Jul 2011
Location: Western Wisconsin

Thanks, I'll get it about three turns in then whenever I can get to a field in the spring I'll sweetspot it all the way then.
killjoywarrior is offline   Reply With Quote
Old 11-11-2012, 12:32 PM   #10 (permalink)
Red
 
Talfuchre's Avatar
 
Join Date: May 2006

CCM Fan
Don't change the reg. CCM regs are great. Test the reg and make sure it is at about 300 PSI.

Put your IVG in about two turn in - and turn up the reg until farting stops - that usually does it.

Invest in building a reg tester.

TF
__________________
Pumpenstein - NSA National Champions

TF's MCB Trust.
Talfuchre is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » CCM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 03:55 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC