-   CCM (
-   -   CCM T2 leak (

newgat 11-14-2012 01:15 AM

CCM T2 leak
Fixed, thanks to all who helped.

B_i_s_c_u_i_t 11-14-2012 01:17 AM

check/replace the o-ring that goes between the VSA and body

newgat 11-14-2012 01:20 AM

The screw that attaches the adapter to the body is more stiff than an old man on viagara. The thing wont budge.

Regardless when i do crank the sucker off, where would I get a replacement for that oring?

Edit: fixed it by flipping the o-ring for now, is it just a regular oring bent in to an oval?

storminnorman 11-14-2012 03:01 AM

Try some lube as well on the oring to keep it from drying out and causing further issues. I believe it is a regular oring just in a oval shape.

Mel 11-14-2012 01:58 PM


Originally Posted by storminnorman (Post 2533307)
I believe it is a regular oring just in a oval shape.

It is. :)

Hogzilla88 11-14-2012 04:19 PM

I'd put some dow 55 on it too

uNrattedd 11-19-2012 04:27 AM

i had a leak in the same area after the first time i fully broke down my t2 for a good cleaning. I just ended up greasing the oring real good with some Dow 33 and the leak stopped. been greasing the same oring everytime i take off the vasa and my t2 hasn't had a leak in the last 2 years

Talfuchre 11-21-2012 09:22 AM

Take off the ASA - drill and tap the hole that you see and put a grub screw in that hole with a ton of loc tite.

Okay - so this is the worst idea ever.

The hole I am speaking of is a relief hole so that if you unscrew your tank any residual air will vent from this hole. It also allows you to unscrew the ASA knob a certain length and vent this pressure as well.

The o-ring on the stem of the On/Off is likely dry or needs to be replaced.


All times are GMT -4. The time now is 10:18 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC