mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   CCM (http://www.mcarterbrown.com/forums/ccm/)
-   -   Ugly ccm s5 (http://www.mcarterbrown.com/forums/ccm/218599-ugly-ccm-s5.html)

Kanas 11-14-2012 09:05 PM

Ugly ccm s5
 
I have a couple questions regarding a S5 mech that I am going to be turning into a pump. A link here >>Custom Cocker? Have questions << will show the mech set up. My first question begins with me using my tank, which is set at 480 pressure. Will this tank be too low for it in mech form, what about pump form? My second question is will this pump kit by ccm work http://www.ebay.com/itm/CCM-2K-Light...21031749627%26 ?

thanks for your time, feel free to call her ugly, hope all the agglets at my field get pissed when they see me with it, and of course I will gain back their trust with my vapor =D. Thanks again....Ben

shredxcam 11-14-2012 10:10 PM

As long as your reg out puts more than 300 350 to be safe you should be good

And any 2k+ pump kit

Old Man 11-14-2012 10:25 PM

As said above you will be more than fine at anything above 300. Same with the pump kit.

MaD 11-15-2012 12:01 AM

That body looks raw. Was it even anodized?

crazyorigin 11-15-2012 12:15 AM

Bitchin feedneck. Any idea who made the feedneck? That thing should feed real good with a grav hopper on it for a good little burst of 6-7 shots. I dig tall feednecks.

Kanas 11-15-2012 07:05 AM

Not sure who made it, thanks for all the input, and I LOVE the look of it, shot be real nice.

Talfuchre 11-15-2012 07:22 AM

That is from a batch of raw body kits.

TF

Kanas 11-15-2012 04:32 PM

Is that good or bad that it is raw? - Ben

MaD 11-15-2012 05:15 PM

It's very good if you're building a custom gun and having it anodized. It's not as good if you're going to take it out and play regularly. It's just a block of raw aluminum with no protection.

Kanas 11-15-2012 05:57 PM

I plan on playing with it regularly, anyway to protect it without the high price?-Ben


All times are GMT -4. The time now is 03:08 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC