|CCM Chipley Machine|
| ||Thread Tools||Search this Thread|
|12-20-2012, 03:15 PM||#1 (permalink)|
Yield and Overcome...
S6 Valve Compatible with T2?
Here's the story... I have a spare set of regular/standard CCM lower internals for a full body cocker or S6. I have a T2 on the way. Trying to decide whether to sell these lowers or keep 'em around in case I ever happen to need a new cup seal, valve stem, or valve spring.
I know the hammer and main spring are different between T2 and S6. But are the valve springs and valves the same? Thanks.
|12-20-2012, 03:59 PM||#2 (permalink)|
they are the same. It will work in the SR1 too.
“Do not yearn too much for a sword made by a famous smith. This is because even if you give a good man a sword worth ten thousand coppers, he will not be able to beat a hundred men each holding a spear worth a hundred coppers.” - Asakura Takakage Toshikage, 1462-1482
Whatever your hand finds to do, do it with your might; for there is no work, nor device, nor knowledge, nor wisdom, in the grave, where you go.
NEW STORE http://store.chipleymachine.com/
DOOR GUNNER handgun mounts for gunsafes.
|Thread Tools||Search this Thread|