|Phantom_Dave ||12-26-2012 01:49 PM |
Cram n Jam on my S6
I am thinking about getting a Cram n Jam for my S6. Only question is how do I take off/unscrew my feed neck without destroying it? My gun is in great shape and really don't want to scratch it up.
|Fluff ||12-26-2012 02:22 PM |
Get a ball end Allen set.
|idkfa ||12-26-2012 02:36 PM |
Isn't the S6 feedneck threaded on? Maybe use a strap wrench.
|shredxcam ||12-26-2012 04:13 PM |
|Marathon ||12-26-2012 05:41 PM |
The feedneck of the S6 threads into the body. They can be stubborn to unscrew. Wrap the feedneck in elastic bands. Put the marker between your knees and start twisting. If Mar shows up you are doing it wrong. :)
|shredxcam ||12-26-2012 05:56 PM |
Or take the collar off and stick something in the spiral,slots
|Phantom_Dave ||12-26-2012 06:48 PM |
Awesome, thanks for the advice guys.
|Talfuchre ||12-26-2012 09:26 PM |
Here is what works - if you really don't want to mar it at all - or bend it.
Find a wooden dowel that fits inside the feedneck snugly. I made one for this purpose alone. It is just a wooden plug that is the size of a hopper neck (Around one inch - or about 1-1/16" inch.
Insert this plug, tighten down the collar with the 5/16th allen key - then use a strap wrench.
If you can - warm up the connection of the feedneck to the body with a lighter before doing this - this should loosen the red loc-tite used.
You should be fine with this.
|BIG BOB ||12-26-2012 09:28 PM |
You might need some heat. I am not sure what locktite ccm uses on the feednecks but a quick touch of a torch will help
|baader ||12-28-2012 02:37 AM |
I put my rotor in, tightened as tight as could, and used that as leverage.
It was hard even like that, I donīt think one could just unscrew that by hand.
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC