mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   CCM (http://www.mcarterbrown.com/forums/ccm/)
-   -   Tight or loose? (http://www.mcarterbrown.com/forums/ccm/226948-tight-loose.html)

idkfa 02-22-2013 11:50 AM

Tight or loose?
 
I am curious as to how the pump arm should be set up on a S6. I have a tendency to loosen it a bit (coming from Phantoms, a tight pump arm binds) at both ends. This does mean, however, that the AT screw can rotate if you press on it.

I have noticed that if I screw the pump arm solidly into the handle plate it tends to rub the inside of the channel of the body.

What is the best way to set it up? Some slack and add a washer or o-ring under the AT screw?

crazyorigin 02-22-2013 08:18 PM

I put mine in the pump plate tight, even with some loctite (they come loctited with red mostly up front) and in the backblock i put it in so it hides most of the threads but not locked in tight.

Crimson Death 02-22-2013 08:30 PM

Tight.

Oh you're talking about paintball....

hoov7888 02-22-2013 09:27 PM

Ya, loose is a bad sign.... Object may be over used or worn out, I was gonna say call Mel but I think she'll redirect you to love line with Dr Phil.

sniper97 03-03-2013 11:08 AM

Also, if you have one of the earlier models, the A/T screw is locktited in place.

Talfuchre 03-03-2013 11:44 AM

Yes please.

TF


All times are GMT -4. The time now is 01:54 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC