-   CCM (
-   -   T2 won't fire... (

Wackomin 02-22-2013 09:47 PM

T2 won't fire...
Hi guys,

I just received my T2 yesterday and for some strange reason after I cock the marker, it will not always fire.. I can force it to fire by holding down the trigger and try to cocking it one or two more times... can someone help me out... Thanks.

Wackomin 02-22-2013 09:50 PM

Here's a 6 second Video of the gun not firing
T2 not Firing - YouTube

boltaction 02-22-2013 09:53 PM

You cocking lug probably just needs a good bit of adjusting. I'm not sure on your familiarity with these guns but, is the hammer locking back when you pump the handle back? You can see the hammer in the slot on the back of the gun. The pin that goes through the bolt goes into a slot in the hammer.

Wackomin 02-22-2013 09:57 PM

This is brand new to me.. but i know that the hammer does lock back...

boltaction 02-22-2013 10:03 PM

Take the pin out from your bolt. Remove bolt. Get allen wrenches, pull hammer back and tighten down the hammer lug probably 2 full turns at least. Then fine tune it from there.

Rotozip2 02-22-2013 10:05 PM

Your lug timing is out just back the lug out like a 1/4 turn.

Watch this, it is very helpful.

CCM T2 Tech Video - Part Five - Timing and Set Up. - YouTube

boltaction 02-22-2013 10:08 PM

I could've just posted this video to begin with. Yours is just an extreme case of the same problem.

Wackomin 02-22-2013 10:13 PM

Thank you so much.. that did it... What exactly did I do though?

crazyorigin 02-22-2013 10:15 PM

Is it plugged in? Haha j/k, overheard some dude i work with on the phone with his kid who was asking why the tv didnt work. I told him i would have told his kid to go outside and do something, forgot about the tv. He asked "well is it plugged in??" "Oh, it is? then i have no idea"

Wackomin 02-22-2013 10:22 PM

One other thing... When I pull the trigger it feels as if its scratching on metal... Is this normal?

All times are GMT -4. The time now is 12:28 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC