T2 won't fire...

Wackomin · 02-22-2013, 08:47 PM

Hi guys,

I just received my T2 yesterday and for some strange reason after I cock the marker, it will not always fire.. I can force it to fire by holding down the trigger and try to cocking it one or two more times... can someone help me out... Thanks.

Wackomin · 02-22-2013, 08:50 PM

Here's a 6 second Video of the gun not firing
T2 not Firing - YouTube

boltaction · 02-22-2013, 08:53 PM

You cocking lug probably just needs a good bit of adjusting. I'm not sure on your familiarity with these guns but, is the hammer locking back when you pump the handle back? You can see the hammer in the slot on the back of the gun. The pin that goes through the bolt goes into a slot in the hammer.

Wackomin · 02-22-2013, 08:57 PM

This is brand new to me.. but i know that the hammer does lock back...

boltaction · 02-22-2013, 09:03 PM

Take the pin out from your bolt. Remove bolt. Get allen wrenches, pull hammer back and tighten down the hammer lug probably 2 full turns at least. Then fine tune it from there.

Rotozip2 · 02-22-2013, 09:05 PM

Your lug timing is out just back the lug out like a 1/4 turn.

Watch this, it is very helpful.

CCM T2 Tech Video - Part Five - Timing and Set Up. - YouTube

boltaction · 02-22-2013, 09:08 PM

I could've just posted this video to begin with. Yours is just an extreme case of the same problem.

Wackomin · 02-22-2013, 09:13 PM

Thank you so much.. that did it... What exactly did I do though?

crazyorigin · 02-22-2013, 09:15 PM

Is it plugged in? Haha j/k, overheard some dude i work with on the phone with his kid who was asking why the tv didnt work. I told him i would have told his kid to go outside and do something, forgot about the tv. He asked "well is it plugged in??" "Oh, it is? then i have no idea"

Wackomin · 02-22-2013, 09:22 PM

One other thing... When I pull the trigger it feels as if its scratching on metal... Is this normal?

02-22-2013, 08:47 PM	#1 (permalink)
Wackomin Newbie Join Date: Jan 2013	T2 won't fire... Hi guys, I just received my T2 yesterday and for some strange reason after I cock the marker, it will not always fire.. I can force it to fire by holding down the trigger and try to cocking it one or two more times... can someone help me out... Thanks.

02-22-2013, 08:53 PM	#3 (permalink)
boltaction ------------ Join Date: Jun 2011 Location: Derry, NH	You cocking lug probably just needs a good bit of adjusting. I'm not sure on your familiarity with these guns but, is the hammer locking back when you pump the handle back? You can see the hammer in the slot on the back of the gun. The pin that goes through the bolt goes into a slot in the hammer. __________________ http://www.mcarterbrown.com/forums/f...-feedback.html

02-22-2013, 09:03 PM	#5 (permalink)
boltaction ------------ Join Date: Jun 2011 Location: Derry, NH	Take the pin out from your bolt. Remove bolt. Get allen wrenches, pull hammer back and tighten down the hammer lug probably 2 full turns at least. Then fine tune it from there. __________________ http://www.mcarterbrown.com/forums/f...-feedback.html

02-22-2013, 09:08 PM	#7 (permalink)
boltaction ------------ Join Date: Jun 2011 Location: Derry, NH	I could've just posted this video to begin with. Yours is just an extreme case of the same problem. __________________ http://www.mcarterbrown.com/forums/f...-feedback.html

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

02-22-2013, 08:50 PM	#2 (permalink)
Wackomin Newbie Join Date: Jan 2013	Here's a 6 second Video of the gun not firing T2 not Firing - YouTube

02-22-2013, 08:57 PM	#4 (permalink)
Wackomin Newbie Join Date: Jan 2013	This is brand new to me.. but i know that the hammer does lock back...

02-22-2013, 09:05 PM	#6 (permalink)
Rotozip2 Rec Poster Join Date: Aug 2012 Location: St. Louis	Your lug timing is out just back the lug out like a 1/4 turn. Watch this, it is very helpful. CCM T2 Tech Video - Part Five - Timing and Set Up. - YouTube

02-22-2013, 09:13 PM	#8 (permalink)
Wackomin Newbie Join Date: Jan 2013	Thank you so much.. that did it... What exactly did I do though?

02-22-2013, 09:15 PM	#9 (permalink)
crazyorigin .67cal Buwwets! Join Date: Mar 2008 Location: Central Southern Upstate NY	Is it plugged in? Haha j/k, overheard some dude i work with on the phone with his kid who was asking why the tv didnt work. I told him i would have told his kid to go outside and do something, forgot about the tv. He asked "well is it plugged in??" "Oh, it is? then i have no idea"

02-22-2013, 09:22 PM	#10 (permalink)
Wackomin Newbie Join Date: Jan 2013	One other thing... When I pull the trigger it feels as if its scratching on metal... Is this normal?