mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   CCM (http://www.mcarterbrown.com/forums/ccm/)
-   -   T2 questions (http://www.mcarterbrown.com/forums/ccm/228002-t2-questions.html)

cougar20th 03-05-2013 01:19 PM

T2 questions
 
Im considering getting a T2 to turn into a semi so ive got a few questions

1) what is the threading on the front of the gun? 2k autococker?

2) Do you have to use both pumprods to the midblock? Is one ok?

3) what is on the front of the gun to key a frontblock?

Tracker 03-05-2013 01:35 PM

threading is 2k

there have been semi T2's with a single ram.. personally i think a single ram is a cop out.. but dual ram cockers dont really exist

there is nothing to hold a front block in place, the front edge is just a rounded out

here are the main issues you are going to have with your project

the ASA doesnt have provisions for a timing rod

the front of the body will need to be made flat (not nesscary, but if you want to keep a front block on steady, it would be worth the trouble)

and the body is rounded on the bottom, so you will either need an adapter plate, or to modify your frame (but that might make the sear go too high into the body). or youll need to cutsom make a frame.. as theres NOTHING from CCM that has a slider plate, and a rounded top

best of luck to you. look forward to seeing what you come up with

Tracker

shredxcam 03-05-2013 08:01 PM

Mini it and e use mini front block

hoov7888 03-05-2013 08:13 PM

I would contact Mel and see if she could help you out with a special order. Its a long shot but ccm is a great company and I wouldn't be surprised if they helped you out or pointed you in the right direction. Best of luck.

....post pics when finished!

Talfuchre 03-05-2013 08:15 PM

Quote:

Originally Posted by cougar20th (Post 2644652)
Im considering getting a T2 to turn into a semi so ive got a few questions

This is where I stopped reading and you died to me.

TF

Christacular 03-06-2013 01:38 PM

Quote:

Originally Posted by Tracker (Post 2644669)
threading is 2k

there have been semi T2's with a single ram.. personally i think a single ram is a cop out.. but dual ram cockers dont really exist

there is nothing to hold a front block in place, the front edge is just a rounded out

here are the main issues you are going to have with your project

the ASA doesnt have provisions for a timing rod

the front of the body will need to be made flat (not nesscary, but if you want to keep a front block on steady, it would be worth the trouble)

and the body is rounded on the bottom, so you will either need an adapter plate, or to modify your frame (but that might make the sear go too high into the body). or youll need to cutsom make a frame.. as theres NOTHING from CCM that has a slider plate, and a rounded top

best of luck to you. look forward to seeing what you come up with

Tracker

He could also stick with the stock frame, slap an MQ in there, and just put an e-frontblock on the front and have a single trigger, semi, MQ'd, T2 :clapping:

Dr. PhunkyPants 03-11-2013 03:24 PM

Welcome to MCB. Good luck with your project.

Talfuchre 03-12-2013 12:13 PM

Quote:

Originally Posted by Dr. PhunkyPants (Post 2650929)
Welcome to MCB. Good luck with your project.

Damn......


TF

cougar20th 03-12-2013 12:22 PM

I just have no experience with a T2. And none of my friend have one I can borrow anymore. Figured I would get alittle background on them before spending any money.

Lindsay 03-12-2013 02:08 PM

Do you need to see one again before you buy a new one or what?


All times are GMT -4. The time now is 09:28 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC