mcarterbrown.com  

CCM Chipley Machine

Reply
 
Thread Tools Search this Thread
Old 03-25-2013, 09:56 PM   #1 (permalink)
MCB Member
 
Join Date: Oct 2007

CCM Fan
Dual Rod Pump Plates for your projects

These parts are from a project I did several years ago and the dropped it.

These of course are dual rod pump plates for our standard pump handles.

I don't have any back blocks for these plates. I didn't make any rods either.

So if you have a project going and you need a DR pump plate here you go.

These are raw 6061 alum.

$15 ea. shipped

__________________
“Do not yearn too much for a sword made by a famous smith. This is because even if you give a good man a sword worth ten thousand coppers, he will not be able to beat a hundred men each holding a spear worth a hundred coppers.” - Asakura Takakage Toshikage, 1462-1482

Ecc. 9-10
Whatever your hand finds to do, do it with your might; for there is no work, nor device, nor knowledge, nor wisdom, in the grave, where you go.

NEW STORE http://store.chipleymachine.com/

DOOR GUNNER handgun mounts for gunsafes.

http://www.machineshopdpm.com/
CCMachinist is online now   Reply With Quote
Old 03-26-2013, 01:25 PM   #2 (permalink)
Brass Mafia Wannabe
 
Join Date: Sep 2010
Location: Oh Hi Oh

Do you plan on making any more dual rod back blocks/rods any more by chance?
__________________
Quote:
Originally Posted by Floundah View Post
Now that's something worth fundraising for, an MCB zombie defense fort. With indoor fields. And blackjack. And hookers.
Leave me some feedback if you've dealt with me:
http://www.mcarterbrown.com/forums/f...-feedback.html
artguy63 is offline   Reply With Quote
Old 03-26-2013, 01:55 PM   #3 (permalink)
MCB Member
 
Thelar's Avatar
 
Join Date: Jul 2006
Location: LeRoy, IL

I will take one. Sent you a PM.
__________________
My Feedback
Thelar is offline   Reply With Quote
Old 03-26-2013, 03:16 PM   #4 (permalink)
MCB Member
 
Join Date: Oct 2007

CCM Fan
Quote:
Originally Posted by artguy63 View Post
Do you plan on making any more dual rod back blocks/rods any more by chance?
The issue was making these fit other guns and existing back blocks.

It became more of custom fitting the DR to the gun.

Even CCM guns had to have the back block modified. Now you are dealing with anodizing and so on.

The same thing came up with the ICS.


We don't have that issue with the T2. That's because it's controlled here.
__________________
“Do not yearn too much for a sword made by a famous smith. This is because even if you give a good man a sword worth ten thousand coppers, he will not be able to beat a hundred men each holding a spear worth a hundred coppers.” - Asakura Takakage Toshikage, 1462-1482

Ecc. 9-10
Whatever your hand finds to do, do it with your might; for there is no work, nor device, nor knowledge, nor wisdom, in the grave, where you go.

NEW STORE http://store.chipleymachine.com/

DOOR GUNNER handgun mounts for gunsafes.

http://www.machineshopdpm.com/
CCMachinist is online now   Reply With Quote
Old 03-26-2013, 06:45 PM   #5 (permalink)
Brass Mafia Wannabe
 
Join Date: Sep 2010
Location: Oh Hi Oh

Quote:
Originally Posted by CCMachinist View Post
The issue was making these fit other guns and existing back blocks.

It became more of custom fitting the DR to the gun.

Even CCM guns had to have the back block modified. Now you are dealing with anodizing and so on.

The same thing came up with the ICS.


We don't have that issue with the T2. That's because it's controlled here.
Ah gotcha. I was debating on picking one up for the possibility of getting an S6. No worries Bill.
__________________
Quote:
Originally Posted by Floundah View Post
Now that's something worth fundraising for, an MCB zombie defense fort. With indoor fields. And blackjack. And hookers.
Leave me some feedback if you've dealt with me:
http://www.mcarterbrown.com/forums/f...-feedback.html
artguy63 is offline   Reply With Quote
Old 03-26-2013, 09:00 PM   #6 (permalink)
Pronounced Hooper
 
HOEPER's Avatar
 
Join Date: Jan 2010
Location: NoDak

I'll take on if there are any left. Pm'ing now.
__________________
On the subject of Holy water paintballs:
Quote:
Originally Posted by CrazyRuskii View Post
I can see it now, a mini van full of priests going 80mph through a suburb blasting metallica....


Feedback 2012 Sale WTB Thread
HOEPER is offline   Reply With Quote
Old 03-28-2013, 02:14 PM   #7 (permalink)
Old man with a pump
 
Phantom_Dave's Avatar
 
Join Date: May 2012
Location: Alabama

CCM Fan
Pm'ed. I'll take one also please.
__________________
You can run, but it only means you will die tired.
Phantom_Dave is offline   Reply With Quote
Old 03-31-2013, 11:56 AM   #8 (permalink)
MCB Member
 
Join Date: Oct 2007

CCM Fan
TTT
__________________
“Do not yearn too much for a sword made by a famous smith. This is because even if you give a good man a sword worth ten thousand coppers, he will not be able to beat a hundred men each holding a spear worth a hundred coppers.” - Asakura Takakage Toshikage, 1462-1482

Ecc. 9-10
Whatever your hand finds to do, do it with your might; for there is no work, nor device, nor knowledge, nor wisdom, in the grave, where you go.

NEW STORE http://store.chipleymachine.com/

DOOR GUNNER handgun mounts for gunsafes.

http://www.machineshopdpm.com/
CCMachinist is online now   Reply With Quote
Old 04-06-2013, 02:02 AM   #9 (permalink)
Active Member
 
Join Date: Oct 2012

Custom halfblock build

Bill, here are plates we bought from you!! =)
marksldvr is offline   Reply With Quote
Old 04-06-2013, 03:04 AM   #10 (permalink)
MCB Member
 
Join Date: Oct 2007

CCM Fan
Good job.

looks like it was done on purpose.
__________________
“Do not yearn too much for a sword made by a famous smith. This is because even if you give a good man a sword worth ten thousand coppers, he will not be able to beat a hundred men each holding a spear worth a hundred coppers.” - Asakura Takakage Toshikage, 1462-1482

Ecc. 9-10
Whatever your hand finds to do, do it with your might; for there is no work, nor device, nor knowledge, nor wisdom, in the grave, where you go.

NEW STORE http://store.chipleymachine.com/

DOOR GUNNER handgun mounts for gunsafes.

http://www.machineshopdpm.com/
CCMachinist is online now   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » CCM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 12:25 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC