|CCM Chipley Machine|
| ||Thread Tools||Search this Thread|
|04-12-2013, 09:51 PM||#1 (permalink)|
Join Date: Jan 2008
Location: North Dakota
CCM S6 reg o-ring size
Not the o-ring above the threads on the reg, but the one just below the threads on the reg. The top half of the reg where it screws in the VA. I've had this missing since I got my S6, I think it is time I put an o-ring on there.
|04-12-2013, 10:37 PM||#2 (permalink)|
Join Date: Apr 2011
Not to be assuming, but did you check the manuals by TF?
I think that oring size is in there.
My Feedback: http://www.mcarterbrown.com/forums/f...-feedback.html
|04-13-2013, 10:28 AM||#4 (permalink)|
Red - Black
Okay - If you are talking about an oring BELOW the threads (the threads for the ASA) - this is a 'spacer' o-ring - and it can be any size you want that works. It is not a standard O-ring for CCM's.
Pumpenstein - NSA National Champions
TF's MCB Trust.
|Thread Tools||Search this Thread|