J12 Maintenance and tech
Question. What do you set the reg at, screws in from flush, and how do you adjust velocity.
Trying to sweet spot this so I can get some crazy shots. My brothers T2 is set up nice.
Thanks. Tried looking for a manual so I don't sound like a total noob
That gives me a lot of useful videos but...
I don't see anything about regs sweet spot, turns in from flush. Something factory recommended and I don't see where the velocity adjustment is. Is it and the reg the same thing like on egos?
Trying to get some input and a link to a bunch of videos didn't answer a question real well.
He’ll get you dialed in and be able to answer all your questions.
you sweet spot it the same as with any autococker based gun. Mine was done from the factory. I would have to check but I believe mine is flush or really close to flush. If you dont know how to sweetspot an autococker then look up the halfsquat41 channel on youtube. There is a sweetspot video there.
the velocity adjustment is through the back like on most autococker based guns. Unlike other pumps/cocker, the j12 uses a 1/8" allen wrench and not a 3/16" allen wrench. The spring on the j12 is behind the ivg but the ivg is reversed threaded so it is still clockwise = + and counterclockwise = -
Honestly - you are just guessing unless you have a reg tester. You can sweet spot it - and that will work - but 'how many turns' and 'where to set the turns on the reg' are just base lines and should not be used to fully tech a marker.
Ryan your post help a lot. I went one key smaller and couldn't find the ivg. I uhh
k I got her shooting where I want her.
To set my reg on my t2 to 350 psi.. The reg screw is almost all the way in!
|All times are GMT -4. The time now is 12:10 AM.|
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC