mcarterbrown.com
 

CCM Chipley Machine

Reply
 
Thread Tools Search this Thread
Old 04-22-2013, 05:31 PM   #1 (permalink)
From A5 & X7 og.net
 
Join Date: Aug 2011
Location: Wellsville, Ohio

CCM Fan
J12 Maintenance and tech

Question. What do you set the reg at, screws in from flush, and how do you adjust velocity.

Trying to sweet spot this so I can get some crazy shots. My brothers T2 is set up nice.

Thanks. Tried looking for a manual so I don't sound like a total noob
GhostLeader 101 is offline   Reply With Quote
Old 04-22-2013, 07:27 PM   #2 (permalink)
MCB Member
 
bigbadbubba1337's Avatar
 
Join Date: Aug 2010
Location: Oklahoma

CCM J12 Tech Video's - YouTube
__________________
bigbadbubba1337 is offline   Reply With Quote
Old 04-23-2013, 08:49 AM   #3 (permalink)
From A5 & X7 og.net
 
Join Date: Aug 2011
Location: Wellsville, Ohio

CCM Fan
That gives me a lot of useful videos but...
I don't see anything about regs sweet spot, turns in from flush. Something factory recommended and I don't see where the velocity adjustment is. Is it and the reg the same thing like on egos?
Trying to get some input and a link to a bunch of videos didn't answer a question real well.
GhostLeader 101 is offline   Reply With Quote
Old 04-23-2013, 02:09 PM   #4 (permalink)
MCB Member
 
CCM CHICK's Avatar
 
Join Date: Sep 2007
Location: Far- Nor-Cal

CCM Fan
Quote:
Originally Posted by GhostLeader 101 View Post
That gives me a lot of useful videos but...
I don't see anything about regs sweet spot, turns in from flush. Something factory recommended and I don't see where the velocity adjustment is. Is it and the reg the same thing like on egos?
Trying to get some input and a link to a bunch of videos didn't answer a question real well.
Best bet is to call and speak directly to Rod. He is here M-Thurs 7am to 3:30pm pst. 1-877-412-6850

He’ll get you dialed in and be able to answer all your questions.
__________________
I will be more than happy to answer any CCM related questions, just give me a call!
CCM: 1-877-412-6850
melissa@chipleymachine.com


Quote:
Originally Posted by Bored383 View Post
I don't care what anyone uses to play - just don't be a douche to your fellow players. Its the golden rule.
CCM CHICK is offline   Reply With Quote
Old 04-23-2013, 03:57 PM   #5 (permalink)
Seasoned Member
 
ryanhall41's Avatar
 
Join Date: Jul 2010

you sweet spot it the same as with any autococker based gun. Mine was done from the factory. I would have to check but I believe mine is flush or really close to flush. If you dont know how to sweetspot an autococker then look up the halfsquat41 channel on youtube. There is a sweetspot video there.

the velocity adjustment is through the back like on most autococker based guns. Unlike other pumps/cocker, the j12 uses a 1/8" allen wrench and not a 3/16" allen wrench. The spring on the j12 is behind the ivg but the ivg is reversed threaded so it is still clockwise = + and counterclockwise = -
__________________
Jackal RDL, Works autocoker, Dragon Timmy, Dye dm3 F/S/T

WTB Eclipse F1 cocker or any undrilled eclipse bodies

ryanhall41 is offline   Reply With Quote
Old 04-23-2013, 05:19 PM   #6 (permalink)
Blue - Red
 
Talfuchre's Avatar
 
Join Date: May 2006

CCM Fan
Honestly - you are just guessing unless you have a reg tester. You can sweet spot it - and that will work - but 'how many turns' and 'where to set the turns on the reg' are just base lines and should not be used to fully tech a marker.

TF
__________________
Pumpenstein - NSA National Champions

TF's MCB Trust.
Talfuchre is offline   Reply With Quote
Old 04-23-2013, 05:49 PM   #7 (permalink)
From A5 & X7 og.net
 
Join Date: Aug 2011
Location: Wellsville, Ohio

CCM Fan
Ryan your post help a lot. I went one key smaller and couldn't find the ivg. I uhh
k I got her shooting where I want her.
Thanks guys
GhostLeader 101 is offline   Reply With Quote
Old 04-23-2013, 09:52 PM   #8 (permalink)
Active Member
 
PumpFreak's Avatar
 
Join Date: Sep 2012

To set my reg on my t2 to 350 psi.. The reg screw is almost all the way in!
PumpFreak is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » CCM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 02:30 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC