mcarterbrown.com  

CCM Chipley Machine

Reply
 
Thread Tools Search this Thread
Old 05-08-2013, 12:20 AM   #1 (permalink)
Sniper
 
hoov7888's Avatar
 
Join Date: Apr 2011
Location: southern California

CCM Fan
cant figure this out? rouge trigger issues

When I lay my gun on its left side the trigger shoots fine and relatively crisp. When I lay it on the right ride I have to pull the trigger allll the way back and it feels like it barely clicks to fire.

Has anyone else had this problem? Any solutions?

I normally wouldn't care but it started to happen last weekend when my gun wasnt laying on its side.


Its a t2 by the way
hoov7888 is offline   Reply With Quote
Old 05-08-2013, 03:54 AM   #2 (permalink)
Vieux.
 
Allblack's Avatar
 
Join Date: Jun 2009
Location: Lyon, France

CCM Fan
I've never seen this, maybe it started to break. You should take your trigger out of the frame and inspect it.
__________________

Allblack is offline   Reply With Quote
Old 05-08-2013, 09:37 AM   #3 (permalink)
Sniper
 
hoov7888's Avatar
 
Join Date: Apr 2011
Location: southern California

CCM Fan
I think my a/t cam screw might have been a little too tight?
hoov7888 is offline   Reply With Quote
Old 05-13-2013, 09:14 PM   #4 (permalink)
Rec Poster
 
Marui20025's Avatar
 
Join Date: May 2013
Location: Oahu, hawaii

I get the same problem with my 6.5, try playing around the the trigger adjustments/settings
Marui20025 is offline   Reply With Quote
Old 05-13-2013, 09:25 PM   #5 (permalink)
Active Member
 
Join Date: Mar 2009
Location: Honolulu, Hawaii

When you lay it on the left side, take a look and see if the auto trigger cam (not the screw but the barrel that slides into the grip frame) drops out of the trigger frame. When this happens, you will have that effect. CCM started putting pins in the trigger frame to prevent the cam from moving and this from happening.

There are other fixes in older grip frames that don't have the pin or ball bearing on a spring.
SeuDog is offline   Reply With Quote
Old 05-15-2013, 07:48 PM   #6 (permalink)
Sniper
 
hoov7888's Avatar
 
Join Date: Apr 2011
Location: southern California

CCM Fan
Its got the pin and hole drilled in it. I think I just had the screw to the a/t too tight. Works now, going to play a tournament with it Sunday.....fingers crossed(not about winning, just hoping my gun shoots good!)
hoov7888 is offline   Reply With Quote
Old 05-20-2013, 11:35 AM   #7 (permalink)
pump & bmx
 
Join Date: Jun 2010
Location: Goose Creek, SC
Send a message via MSN to extrabonez

CCM Fan
also double check the pin through the frame for the sear is in the holes in the frame on both sides. my 45* frame started having issues along the lines of what you are saying and it was due to being out of one of the holes allowing it to move in an awkward direction causing misfires or trouble with getting to fire at all.
__________________
My Feedback on MCB
extrabonez is offline   Reply With Quote
Old 05-21-2013, 03:03 PM   #8 (permalink)
Active Member
 
Join Date: Mar 2009
Location: Honolulu, Hawaii

Quote:
Originally Posted by hoov7888 View Post
Its got the pin and hole drilled in it. I think I just had the screw to the a/t too tight. Works now, going to play a tournament with it Sunday.....fingers crossed(not about winning, just hoping my gun shoots good!)
There was a series of attempts to stop the cam from shifting or moving. One of those attempts prior to the pin was the use of a spring with a ball-bearing. The spring sat in the hole in the frame but the hole did not go all the way through.

Wonder if the hole that you are seeing is 1) filled with a long pin or 2) giving the illusion that there is a hole but is really for a spring and ball bearing.

How old is the marker?

You are probably best to call Rod of CCM. There are different cams as well for different frames. I've come across second hand markers with the wrong cam. If it is the wrong cam for the trigger frame then as EXTRABONEZ said, the pin will not go through the frame.

Last edited by SeuDog; 05-21-2013 at 03:06 PM.
SeuDog is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » CCM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 08:58 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC