mcarterbrown.com  

CCM Chipley Machine

Reply
 
Thread Tools Search this Thread
Old 10-14-2013, 09:34 AM   #1 (permalink)
203 but 518 NY at heart
 
Jackal's Avatar
 
Join Date: Jan 2007
Location: New Fairfield CT

CCM Fan
A/T cam adjustment help needed

Ok I recently picked up another T2 that needed to be saved from a friend. One of the problems that I have noticed is that, at rest the flat spot of the A/T cam does not rest in the correct place. Not sure if its the cam or if its the wholes in the cam arm that are not drilled correctly. Her are the pics, that's for any assistance in advance.


EDIT- since ive started a thread on this T2, I might as well keep things consolidated.
One other issue I forgot about. The rear screw that hold the tubes together is stripped (the T-10 screw). I do not own any EZ outs or any other tools long enough to get at it with. Any suggestions?



__________________
Albany's 518th Brigade, WestPoint MVT Fall 2010

Last edited by Jackal; 10-15-2013 at 04:33 PM.
Jackal is offline   Reply With Quote
Old 10-15-2013, 12:14 AM   #2 (permalink)
Active Member
 
Rotozip2's Avatar
 
Join Date: Aug 2012
Location: St. Louis

CCM Fan
Its normal my S6.5 does the same thing.
Rotozip2 is offline   Reply With Quote
Old 10-15-2013, 12:38 PM   #3 (permalink)
Red - Black
 
Talfuchre's Avatar
 
Join Date: May 2006

CCM Fan
That indeed is the correct spot.

TF
__________________
Pumpenstein - NSA National Champions

TF's MCB Trust.
Talfuchre is offline   Reply With Quote
Old 10-15-2013, 12:53 PM   #4 (permalink)
203 but 518 NY at heart
 
Jackal's Avatar
 
Join Date: Jan 2007
Location: New Fairfield CT

CCM Fan
Ok I only ask because it hangs sometimes when I try to fire it. I know when I disconnect the arm it fires perfect. Any ideas what may be the cause of the hangup?
__________________
Albany's 518th Brigade, WestPoint MVT Fall 2010
Jackal is offline   Reply With Quote
Old 10-15-2013, 04:33 PM   #5 (permalink)
203 but 518 NY at heart
 
Jackal's Avatar
 
Join Date: Jan 2007
Location: New Fairfield CT

CCM Fan
TF, any suggestions on the "edit" issue listed above?
__________________
Albany's 518th Brigade, WestPoint MVT Fall 2010
Jackal is offline   Reply With Quote
Old 10-15-2013, 05:36 PM   #6 (permalink)
MCB Member
 
Join Date: Apr 2006

Hammer lug possibly set too long to release at the right spot of the trigger pull.
__________________
My feedback thread
IndustrialHalo is offline   Reply With Quote
Old 10-15-2013, 05:44 PM   #7 (permalink)
203 but 518 NY at heart
 
Jackal's Avatar
 
Join Date: Jan 2007
Location: New Fairfield CT

CCM Fan
It does release everytime during A/T right about 1/8" from fully closed.
__________________
Albany's 518th Brigade, WestPoint MVT Fall 2010
Jackal is offline   Reply With Quote
Old 10-15-2013, 09:36 PM   #8 (permalink)
Red - Black
 
Talfuchre's Avatar
 
Join Date: May 2006

CCM Fan
As it is the rear screw - what are your thoughts about trying to 'slot' the screw head with a small dremel wheel?

If not - another options is to buy an inexpensive torx wrench and put a small dab of JB weld on it - let it dry in place - and then try to turn it out.

TF
__________________
Pumpenstein - NSA National Champions

TF's MCB Trust.
Talfuchre is offline   Reply With Quote
Old 10-15-2013, 10:34 PM   #9 (permalink)
203 but 518 NY at heart
 
Jackal's Avatar
 
Join Date: Jan 2007
Location: New Fairfield CT

CCM Fan
Thanks I think ill give the kb weld methode a try.
__________________
Albany's 518th Brigade, WestPoint MVT Fall 2010
Jackal is offline   Reply With Quote
Old 10-16-2013, 10:59 AM   #10 (permalink)
Red - Black
 
Talfuchre's Avatar
 
Join Date: May 2006

CCM Fan
I have heard of it working.

However - I cannot imagine an easy out that size would not work. You may need to tap it into place and use a wrench for it - but it should be long enough - you only need it about 1.5 inches to work in your case.

TF
__________________
Pumpenstein - NSA National Champions

TF's MCB Trust.
Talfuchre is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » CCM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 02:17 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC