|CCM Chipley Machine|
| ||Thread Tools||Search this Thread|
|11-15-2013, 12:25 PM||#1 (permalink)|
Join Date: Mar 2012
Location: So Cal (OC)
Polished silver finish
So I was wondering what it would take to give my reg the same polished silver finish as my ccm trigger frame. Does anyone know how to reproduce the same finish? It's it anodized after polishing? Is there some kind of coating on it?
|11-15-2013, 02:35 PM||#3 (permalink)|
Join Date: Mar 2011
also, if the reg body is aluminum, it would likely need to be clear-coated to prevent it from oxidizing. use many light coats, and spray at room temperature.
|11-15-2013, 04:16 PM||#5 (permalink)|
We use a buffing compound (easily found at most hardware or automotive places. Bill just told me you can find it at truck stops too.) and a polishing wheel. You don’t need anything too heavy duty, the $35 version from Harbor Feight will do the job. Make sure if the part was previously ano’d it has been stripped. Then use the compound and wheel to brighten and buff the part, then all you need is a new coat of Clear ano.
PM me if you have any questions. Thank you and good luck with your project.
|Thread Tools||Search this Thread|