Paintball

[Drachen]

I wouldn't call Phantom's an old gun. Sure, there's older models (which is what I think spymongoose was talking about) but it's not really an old marker.

[spymongoose]

I bring up the phantom as its a currently produced pumpgun and the primary competitor to CCM. It is the current standard in stock class markers. I'm asking for a CCM sniper that is better than a phantom.

[Contour]

Originally Posted by spymongoose

I bring up the phantom as its a currently produced pumpgun and the primary competitor to CCM. It is the current standard in stock class markers. I'm asking for a CCM sniper that is better than a phantom.

Idk, in my opinion nelsons are the best stock class, anything bigger and heaver for stock class is kind of a pita. Not saying a sniper couldn't compete or anything.

[Heebs]

mQ'd sniper with convertible feed

[pump]

Originally Posted by Drachen

I wouldn't call Phantom's an old gun. Sure, there's older models (which is what I think spymongoose was talking about) but it's not really an old marker.

wouldnt the only diff from the old ones and new ones is removable barrel.......different powertube design....and the diffuser bolt?....and to increase efficiency just swap that part with the old one...my friends all do that...or they just drill them out


but i see.....i think only some easy to do devolumizing and a some small changes to the valve and the CCM could get some nice shots off of a 12 gram....

but i doubt it be as smooth and as quiet as a regged setup....

[mojojojoaf]

From CCM...
1) Mid blocked body with dual cocking rods, something cut up and sleek- sleeker than the S6 (thats pretty dam sleek too)
2) 50-80 round agitated or motorized hopper

And most importantly....
3) Continued success in the paintball industry!

[chrisshanks]

I second the Sterling "under-cocking" kit



rainman helped me with this one

you would need to have:
1) extended aluminum rail (0.250"x0.50"x6.75" long)
2) veritcle Auto mag ASA
3) pump handle & plate (as seen in the picture)
4) guide rod coming out of the Automag ASA

the measurements are VERY simple for the threaded hole location on the plate & even the extended rail

not to mention how this would breath new life into Sterling pump like the CCM pump kit has done for the sniper/cocker pumps

just my 0.02

[Bo Knos Bo]

1. A good hopper for pumps as mentioned above
2. Dual pump arms
3. Slide trigger frame
4. Metal elbows for right and left feed guns

[aqua_scummm]

I'm iffy if I personally would buy a double pump armed sniper from CCM.

I am almost positive I would buy a SC nelson from CCM, as long as the price weren't higher than a minicomp

[Heebs]

The biggest selling point for me with a double pump arm kit is that with an MQ sniper you wont need to keep the cocking rod on there.