Paintball

[CCmachinist]

#1The cuts are gone.

#2 Yes we would like to do that.

Originally Posted by Cunha

Make the .45 thin frames without the grooves in the back since not everyone has S6's :P


My main suggestion is a sheridan style bolt to hammer linkage. Mercenary.

Or even just (what has become) the traditional mid block.

[Duzzy]

Merlin threaded mini pump kits! Or at least make 2 for me an then I won't ever ask again.

[CCmachinist]

We really like the bolt on spyder feedneck like the SS25.It really allows for some different variations.We have talked about doing some S6s prototypes that way.
The efficiency thing.We do better at open class.

Originally Posted by Phantom Power

Markers with stock class feeds. Essentially like the SS-25, where you could swap between the stock feed and a feed neck. And tuned for efficiency out of the box, not for the lightest possible pump stroke.

[CCmachinist]

Working on it.

Originally Posted by Simptumz

A "bolt on" pump/auto trigger kit for a Karni (original and the new factory pumps)

[hvacman250]

Release the 2k+ mini kits, with CF pump handle. Melissa promised me one in December! LOL

[CCmachinist]

#1 who knows
#2 working on it
#3 not today.
#4 go long.( i still don't get it).Isn't that what a pump automag is?

Originally Posted by Cowboy

merlin pump kit

mini pump kit in pre and post 2k

86* hinge and slider frame and drop in at kits as said above

this would be a long shot but a pnuematic assist pump marker

thanks

Cowboy

[CCmachinist]

We really are working on it.We are just way behind.

Originally Posted by hvacman250

Release the 2k+ mini kits, with CF pump handle. Melissa promised me one in December! LOL

[CCmachinist]

I would like to see one of these nightmare valves.

Originally Posted by russc

Hey, who says it has to be Nelson? I bet amazing things could be done with a Nightmare style valve - inline but pressure can be dropped because cocking pressure doesn't hit the valve stem.

[etherfall]

I think he means you use pneumatics to cock the bolt, but you use a pump handle to operate the 3-way.

[CCmachinist]

The Phantom pretty much has that end covered.I did talk to Mike a while back about making a body.Threaded feedneck and autococker barrel threads.We run out of time making our own stuff.Lots of ideas not enough time.We do like the single tube though.

Originally Posted by cockerpunk

a gun that actually works for stock class.