What would you like to see next from CCM? - Page 7

SnowZone · 02-04-2008, 09:19 AM

A couple of items I'd like to see (as touched on above):
1. Single 45* slide frame, with/without AT, but with roller internals standard.
2. Raw bodies/frames available for customization (finished internals without external milling?).
3. S6 style pump plates as an option.
4. Longer barrel backs (4" control bore?), and a shorter front to accomodate.
5. Half block (S3!) marker/ conversion kits (sled/rod/hammer/bolt/pin).

Most of these are long shots, but hey ... ?
Thanks for continuing to make a great line of products.

fastev · 02-04-2008, 01:29 PM

Quote:

Originally Posted by SnowZone

3. S6 style pump plates as an option.

I spoke to Melissa a month or two ago and she said that was no problem...

pump · 02-04-2008, 03:21 PM

hey heres one that should be easy

just make a single slider frame.....since its harder to find.....and we can just use any normal 98 style plate

because some prefer Omega internals some perfer AKA etc.

DocRock · 02-04-2008, 03:31 PM

What is the deal with S6 style pump plates? The reason I ask is I've seen a custom built jackal bodied pump and it had an S6 style pump plate on it. Is it a necessity with some bodies or is it just more of a looks thing.

Thanks

DarkArmorPB · 02-04-2008, 03:51 PM

The S6 plate is lighter then the standard CCM pump plate.

DA

Wubby · 02-04-2008, 03:59 PM

Quote:

Originally Posted by xkpxfatassxx

There's one already made...
Series 6 Catastropic Failure

haha i know, hince the (hehe)

Grimm · 02-04-2008, 11:05 PM

- Pre and post 2k mini pump kits (pre 2k would make me happy in pants)
-.45 thin frames
-phantom undercocking kits with vert air adaptor
-contoured .45 grip for phantom (something to accept standard grips, but less blocky than the CCI grips)

Eli · 02-04-2008, 11:40 PM

Here are my favorite suggestions:

1) Longer barrel backs + shorter tips.

2) Mini pump kits.

3) Maybe a sub $300 gun?

4) Phantom under-cocking kits.

5) An S6 semi?

xkpxfatassxx · 02-05-2008, 12:44 AM

^I couldn't agree more with number 3

Already mentioned, but CCM should come out with a stock class gun with the option of oc rather then vise versa. This will allow a much smaller marker, and something new. Designs are all up to you guys.

Altec · 02-05-2008, 12:59 AM

86* Slider. I'd be tempted to convert my racegun to mechanical if they did that.

A right-feed S6 would also be cool.

Doable-barrel S6. Hehe

02-04-2008, 09:19 AM	#61 (permalink)
SnowZone MCB Member Join Date: Jul 2006 Location: Southwestern Ontario Posts: 154	A couple of items I'd like to see (as touched on above): 1. Single 45* slide frame, with/without AT, but with roller internals standard. 2. Raw bodies/frames available for customization (finished internals without external milling?). 3. S6 style pump plates as an option. 4. Longer barrel backs (4" control bore?), and a shorter front to accomodate. 5. Half block (S3!) marker/ conversion kits (sled/rod/hammer/bolt/pin). Most of these are long shots, but hey ... ? Thanks for continuing to make a great line of products. __________________ Proud Member Of Canadian Response MCB Feedback First posted by AZZY: I thought most kids couldnt spell Angel. I've seen tons of angles for sale, I would like to buy an oblique one please.

02-04-2008, 03:21 PM	#63 (permalink)
pump Seasoned Member Join Date: Aug 2006 Location: under Kapiolani on ramp Posts: 629	hey heres one that should be easy just make a single slider frame.....since its harder to find.....and we can just use any normal 98 style plate because some prefer Omega internals some perfer AKA etc. __________________ Hawaiipb.com Hawaii's Paintball forum NIB Warp Feeds FS Autotriggers for Sliders and Dye Pivots FS

02-04-2008, 03:51 PM	#65 (permalink)
DarkArmorPB VampiresTasteLikeChicken Join Date: May 2006 Location: St Louis area Posts: 859	The S6 plate is lighter then the standard CCM pump plate. DA __________________ How They Make Paintballs. Total Greif Xtreme Paintball park / Milstadt Il. MCBrown Feedback PBNation Feedback

02-04-2008, 11:40 PM	#68 (permalink)
Eli Dumme Join Date: Oct 2006 Location: NoHo, CA Posts: 784	Here are my favorite suggestions: 1) Longer barrel backs + shorter tips. 2) Mini pump kits. 3) Maybe a sub $300 gun? 4) Phantom under-cocking kits. 5) An S6 semi? __________________ Now available in direct feed. MCB Feedback Ebay Feedback

02-05-2008, 12:44 AM	#69 (permalink)
xkpxfatassxx Blah Join Date: Feb 2007 Location: So Cal Posts: 1,285	^I couldn't agree more with number 3 Already mentioned, but CCM should come out with a stock class gun with the option of oc rather then vise versa. This will allow a much smaller marker, and something new. Designs are all up to you guys. __________________ Winchesters 50rnd Hoppers $4 3.5 tanks w/ valve $23 Dealer for: CCM, CCI, CP, and other misc companies. Purchase here:Snap Paintball I am not the owner of snappb.

02-04-2008, 03:31 PM	#64 (permalink)
DocRock Active Member Join Date: Nov 2007 Posts: 162	What is the deal with S6 style pump plates? The reason I ask is I've seen a custom built jackal bodied pump and it had an S6 style pump plate on it. Is it a necessity with some bodies or is it just more of a looks thing. Thanks

02-04-2008, 11:05 PM	#67 (permalink)
Grimm Token Fat Guy Join Date: Nov 2007 Location: Edmonton, Alberta, Canada Posts: 76	- Pre and post 2k mini pump kits (pre 2k would make me happy in pants) -.45 thin frames -phantom undercocking kits with vert air adaptor -contoured .45 grip for phantom (something to accept standard grips, but less blocky than the CCI grips)

02-05-2008, 12:59 AM	#70 (permalink)
Altec Active Member Join Date: Oct 2006 Location: Maryland Posts: 495	86* Slider. I'd be tempted to convert my racegun to mechanical if they did that. A right-feed S6 would also be cool. Doable-barrel S6. Hehe __________________ PROJECT'S Confederate Ballers! -Official Avatar Maker-

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search