How many shots from a 45ci tank? - Page 3

DarkArmorPB · 03-16-2008, 08:10 PM

Sweetspotted the reg and set my fps to right around 270ish. I noticed that my gun got a little more gas hoggish over that speed. Its wierd but it shoots more efficiently at that fps. Don't ask me why.

DA

Talfuchre · 03-17-2008, 09:31 AM

The gnomes hair does not get messed up at 270. That is the key.

TF

pump · 03-23-2008, 03:06 AM

i get 210 with my old Old OLD sniper2 body with CCM valve...and the old stock valve on the right http://www2.hawaii.edu/~koa/stuff/ValveTop.jpg using a longer stem with rubber cupseal

Talfuchre · 03-25-2008, 08:29 AM

Quote:

Originally Posted by pump

i get 210 with my old Old OLD sniper2 body with CCM valve...and the old stock valve on the right http://www2.hawaii.edu/~koa/stuff/ValveTop.jpg using a longer stem with rubber cupseal

210 shots with what tank?

TF

pump · 03-25-2008, 08:31 AM

13 3000

Milkshake · 04-02-2008, 07:37 PM

My new ss25 is not efficient in my opinion, I need to put a gauge on to see what pressure I am running, but with 2000 on a 68/4500 I get a hopper and pod. Since it is mini'd, what pressure would be the best for efficiency? I could play around, but some experience goes a long way IMO. My cocker does so much better, is it because it is mini'd?

mojojojoaf · 04-02-2008, 10:31 PM

Quote:

Originally Posted by sp8nsc

My new ss25 is not efficient in my opinion, I need to put a gauge on to see what pressure I am running, but with 2000 on a 68/4500 I get a hopper and pod. Since it is mini'd, what pressure would be the best for efficiency? I could play around, but some experience goes a long way IMO. My cocker does so much better, is it because it is mini'd?

Its designed to be a low pressure set-up so it uses lots of slow moving air rather than smaller amounts of fast moving air to shoot the ball out of the marker. But when you say a hopper and a pod you mean about 300-400 shots? Since I use 50rd pods and custom mini hopper I would say thats a bit low and oyu should be able to get more out of it.

Milkshake · 04-03-2008, 08:07 PM

About 300 shots, I will put a gauge on and see where the pressure is at. I have not put alot of paint through it, maybe a case and 1/2, so some break in is still in order. I hope I can get some improvement.

Talfuchre · 04-04-2008, 08:57 AM

Set the input at 400 psi.

TF

mojojojoaf · 04-04-2008, 01:40 PM

TF,
You know I read your write up and manual on the SS25 but never tuned mine at the suggested 375-400psi. I might do that now that I am running a 13/3000 and need to squeeze as much out of it as possible.

03-16-2008, 08:10 PM	#21 (permalink)
DarkArmorPB VampiresTasteLikeChicken Join Date: May 2006 Location: St Louis area Posts: 859	Sweetspotted the reg and set my fps to right around 270ish. I noticed that my gun got a little more gas hoggish over that speed. Its wierd but it shoots more efficiently at that fps. Don't ask me why. DA __________________ How They Make Paintballs. Total Greif Xtreme Paintball park / Milstadt Il. MCBrown Feedback PBNation Feedback

03-17-2008, 09:31 AM	#22 (permalink)
Talfuchre Moderator to Chef Dave! Join Date: May 2006 Posts: 2,769	The gnomes hair does not get messed up at 270. That is the key. TF __________________ Pumpenstein - NSA National Champions 2006 TF's MCB Trust.

03-23-2008, 03:06 AM	#23 (permalink)
pump Seasoned Member Join Date: Aug 2006 Location: under Kapiolani on ramp Posts: 629	i get 210 with my old Old OLD sniper2 body with CCM valve...and the old stock valve on the right http://www2.hawaii.edu/~koa/stuff/ValveTop.jpg using a longer stem with rubber cupseal __________________ Hawaiipb.com Hawaii's Paintball forum NIB Warp Feeds FS Autotriggers for Sliders and Dye Pivots FS

03-25-2008, 08:31 AM	#25 (permalink)
pump Seasoned Member Join Date: Aug 2006 Location: under Kapiolani on ramp Posts: 629	13 3000 __________________ Hawaiipb.com Hawaii's Paintball forum NIB Warp Feeds FS Autotriggers for Sliders and Dye Pivots FS

04-02-2008, 07:37 PM	#26 (permalink)
Milkshake Active Member Join Date: Mar 2008 Location: upstate SC Posts: 149	My new ss25 is not efficient in my opinion, I need to put a gauge on to see what pressure I am running, but with 2000 on a 68/4500 I get a hopper and pod. Since it is mini'd, what pressure would be the best for efficiency? I could play around, but some experience goes a long way IMO. My cocker does so much better, is it because it is mini'd? __________________ Carolina Riot

04-03-2008, 08:07 PM	#28 (permalink)
Milkshake Active Member Join Date: Mar 2008 Location: upstate SC Posts: 149	About 300 shots, I will put a gauge on and see where the pressure is at. I have not put alot of paint through it, maybe a case and 1/2, so some break in is still in order. I hope I can get some improvement. __________________ Carolina Riot

04-04-2008, 08:57 AM	#29 (permalink)
Talfuchre Moderator to Chef Dave! Join Date: May 2006 Posts: 2,769	Set the input at 400 psi. TF __________________ Pumpenstein - NSA National Champions 2006 TF's MCB Trust.

04-04-2008, 01:40 PM	#30 (permalink)
mojojojoaf Rec Poster Join Date: May 2007 Posts: 78	TF, You know I read your write up and manual on the SS25 but never tuned mine at the suggested 375-400psi. I might do that now that I am running a 13/3000 and need to squeeze as much out of it as possible.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search