mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   CCM (http://www.mcarterbrown.com/forums/ccm/)
-   -   New Series 5 Owner Here w/ a Couple of Questions... (http://www.mcarterbrown.com/forums/ccm/33506-new-series-5-owner-here-w-couple-questions.html)

destro7976 02-24-2008 06:29 PM

New Series 5 Owner Here w/ a Couple of Questions...
 
I just received a used Series 5 and need some help.

First...There is a slight leak in the three way and I was wondering if CCM 3-ways tend to be finicky or if I just need some new orings?

Secondly...The back block sticks in the rearward position from time to time causing a leak out of the end of the ram. What might be causing this? When I move the ram by hand it seems smooth...so any help would be great thanks!

I just want to get her shooting as good as I've heard she can.:)

spymongoose 02-24-2008 07:03 PM

sounds to me that the timing in the three way is off. I would have you verify that that's the case first before you monkey with your timing rod, but I think that explains both your problems... with the 3way shaft timed too early it would leak out or hold the back block rearwards sometimes.

pump 02-27-2008 05:17 AM

you can also get the new pistons....there OMG smooth.....speeds up cycling time noticably

then you can also add a QEV to the ram....then you just talking crazy talk

destro7976 02-28-2008 01:53 PM

Thanks for the suggestions, though the timing doesn't seem too bad. It actually will cycle alright sometimes and then stick open, but there is always a tiny leak in the three way and if I touch the actuating rod at all air dumps out...
Where would I go to obtain the upgades you're talking about Pump? Just CCM's ebay store? Thanks for the help. I'll keep tinkering...

spymongoose 02-28-2008 03:34 PM

Quote:

Originally Posted by destro7976 (Post 329490)
It actually will cycle alright sometimes and then stick open, but there is always a tiny leak in the three way and if I touch the actuating rod at all air dumps out...

timing.

pump 02-28-2008 03:43 PM

Quote:

Originally Posted by destro7976 (Post 329490)
Where would I go to obtain the upgades you're talking about Pump? Just CCM's ebay store? Thanks for the help. I'll keep tinkering...

call thems

EDIT: oh and this is how you mod the ram http://www.mcarterbrown.com/forums/c...-censored.html

Clearush 02-28-2008 04:27 PM

Trigger sticking for some reason, pressure on the lpr set to high?

destro7976 02-28-2008 09:42 PM

Thanks for all the advice. Melissa actually PM'ed me on this so I just called CCM and Rod is pretty sure I'm getting blow by in the ram. So they are sending me the parts to upgrade/rebuild my ram, the Orings to rebuild the Three way, and some other orings just to make sure I get things running smoothly. They treated me so well that I feel great about owning a CCM marker. I'm already plotting what product of theirs to purchase next. Truly excellent company that has earned my business.


All times are GMT -4. The time now is 04:55 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC