Leaking ASA?
 

Why does my ASA Leak from:

http://i19.photobucket.com/albums/b1...b23/825c_1.jpg

Just changed the Macro to braided...and POOF, new problem...

that looks like an exaust hole... it means that whatever oring you got on the pin inside your on off asa needs replaceing.

Or your tank oring is bad. Replace the tank oring first.

It's the pin O-ring. It's quite a normal issue. Hence I always have lots of those o-rings in my tool kit. CCM has started using a harder o-ring which has been holding up alot better.

thanks guys! Checked tank-o-ring in another marker, good to go, will replace that other o-ring, just need to find out where to get one and what size!

CCM will probably send you one if you email them.

On a side note, does anyone know of the blue o-ring on the knob is a tank o-ring? that would be pretty nifty if it was...

it is a spare tank O-ring. And we'll send you O-rings as long as you buy them+ shipping.

CCM Chick, are you coming to SPE again, and can you bring some of the "new" style o-rings, I'd be happy to buy a handfull from you?