mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   CCM (http://www.mcarterbrown.com/forums/ccm/)
-   -   CCM Product Manuals / Video Series / Parts Kit 'how to'. (UPDATED!) (http://www.mcarterbrown.com/forums/ccm/35942-ccm-product-manuals-video-series-parts-kit-how-updated.html)

Talfuchre 03-25-2008 08:48 AM

CCM Product Manuals / Video Series / Parts Kit 'how to'. (UPDATED!)
 
Here is the master link to all the manuals I have written:

Manual Index

Manuals Exist for:

Series 5, Series 5 Basic, Series 5 RF, Series 6 and J2L.
SS25 and Series 6 Prototype
T2
Series 6.5
The Economy Pump Kit.
The Deluxe Pump Kit.
The Grip Frame and Deluxe Kit.
The Internals Kit.
The CCM Regulator.
The Macro Line Fittings
A Quick Start Guide to go into the box of every marker.

I have also compiled a master parts list.

Here is the Video Series for the J12:

CCM Tech Video - J12 - Part One - Tools of the Trade.

CCM Tech Video - Part Two - J12 - Grip Frame and ASA.

CCM Tech Video - Part Three - J12 - Pump Handle and Valve Assembly.

CCM Tech Video - Part Four - J12 - Regulator Assembly.

CCM Tech Video - Part Five - J12 - Hammer Assembly.

CCM Tech Video - Part Six - J12 - Testing the Regulator.

Here is the Video Series for the T2:

CCM T2 Tech Video - Part One - Tools of the Trade.

CCM T2 Tech Video - Part Two - Grip Frame.

CCM T2 Tech Video - Part Three - Top Tube.

CCM T2 Tech Video - Part Four - Bottom Tube.

CCM Regulator Tech Video.

CCM T2 Tech Video - Part Five - Timing and Settings.

Here is the video series for the Series 6.5:

CCM Tech Video S5, S5B, S6, S6.5, J2L - Tools of the Trade.

CCM Tech Video - Series 6.5 Grip Frame.

CCM Tech Video - Regulator.

CCM Tech Video - Series 6.5 Top Tube.

CCM Tech Video - Series 6.5 Bottom Tube - Timing, and Set Up.

Here is the Video Series for the Series 5, Series 5 Basic, Series 6, and J2L:

CCM Tech Video - Tools of the Trade.

CCM Tech Video - S5, S5B, S6, J2L Grip Frame.

CCM Tech Video - Regulator.

CCM Tech Video - S5, S5B, S6, J2L - Finishing the Grip Frame and Top Tube.

CCM Tech Video - S5, S5B, S6, J2L - The Bottom Tube, Timing, and Set Up.

Here is the Video Series for the SS25 and the S6P:

CCM Tech Video - SS25, S6P Tools of the Trade.

CCM Tech Video - SS25, S6P Grip Frame

CCM Tech Video - Regulator

CCM Tech Video - SS25, S6P - Top Tube

CCM Tech Video - SS25, S6P - Bottom Tube.

CCM Tech Video - SS25 - Timing and Set Up.

Miscellaneous Tech Videos:

CCM Tech Video - Universal Air Fittings - How to Assemble and Tech.

CCM Tech Video - Barrel Leaks and 'Chuffing' - How to Fix It.

CCM Tech Video - Shooting Down During Auto Trigger - How to Fix It.

CCM Tech Video - How to Tech your Valve.

CCM Tech Video - Teching Your Valve.

CCM Tech Video - Teching Your Hammer.

CCM Tech Video - How to install a Deluxe kit on a 'cocker.

CCM Tech Video: Buffing Moving Parts.

CCM Tech Video: How to Make a Cleaning Solution.

CCM Tech Video: How to Make a Reg Tester.

CCM Tech Video: How to Remove the Feedneck from the CCM Marker.




Here is the old video series done in 2009 on how to tech the CCM S6, S5, S5B, J2L:

Video #1 - What Tools, Lubricants, and Sealants are needed to work on a CCM marker.

Video #2 - How to Set the Velocity on a CCM Marker.

Video #3 - How to Set the Timing on a CCM Marker.

Video #4 - How to Clean the Marker After a Day of Play.

Video #5 - How to Tech and Clean the CCM Regulator.

Video #6 - How to Clean and Tech the CCM Grip Frames.

Video #7 - Hammer and Valve Disassembly - Part One.

Video #8 - Hammer and Valve Disassembly - Part Two.

Video #9 - Final Assembly, Test, and Tech Tricks.

Lastly, here is the thread on 'How to make a parts Kit'.



TF

Brad Krodel 09-09-2009 09:42 PM

I just bought a new J2L and am awaiting it's arrival. Should I refer to the manual for the S5 & S6 to learn about it's operation and how to maintain it?

Thanks,
Bra Krodel

Talfuchre 09-10-2009 08:45 AM

The Series 6 Manual is will be exactly the same.

TF

Brad Krodel 09-10-2009 09:01 PM

Thanks.

slowerpig81 09-20-2009 09:15 PM

I found an error in the T2 manual. The right side schematic is labeled as "III. The CCM® Series 6 (Facing Right)" Should be T2 of course.

BabelFish 10-27-2009 09:05 PM

Found what I assume are a couple typos in the T2 manual:

Page 11:

Third Paragraph: You tell the reader to turn the IVG three full turns in from the back of the marker in the first sentence, then two full rotations in the second sentence.

Fourth Paragraph, second line: "not the average of the string", should that be "note the average of the string"?

Talfuchre 11-03-2009 09:38 PM

Thanks Babel!

TF

splattttttt 02-11-2011 09:38 PM

VID#3 really came in handy. Been so long sice I timed the bolt, I'd forgotten how too. Or is it I'm just gettin too old?
Well, thanks TF Jason

evilkid94 04-19-2011 06:00 PM

After watching all the videos I only have one question, what is recomended for the s6.5 hammer? No oil like the t2, or light oil like the s6?

Thanks :D

noclue119 04-19-2011 06:15 PM

Quote:

Originally Posted by evilkid94 (Post 1795634)
After watching all the videos I only have one question, what is recomended for the s6.5 hammer? No oil like the t2, or light oil like the s6?

Thanks :D


I use triflow on my s6.5 hammer. at 300 psi reg input, my IVG is all the way out.


All times are GMT -4. The time now is 11:23 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC