|CCM Chipley Machine|
| ||LinkBack||Thread Tools||Search this Thread|
|03-25-2008, 08:48 AM||#1 (permalink)|
Yellow - Green
CCM Product Manuals / Video Series / Parts Kit 'how to'. (UPDATED!)
Here is the master link to all the manuals I have written:
Manuals Exist for:
Series 5, Series 5 Basic, Series 5 RF, Series 6 and J2L.
SS25 and Series 6 Prototype
The Economy Pump Kit.
The Deluxe Pump Kit.
The Grip Frame and Deluxe Kit.
The Internals Kit.
The CCM Regulator.
The Macro Line Fittings
A Quick Start Guide to go into the box of every marker.
I have also compiled a master parts list.
Here is the Video Series for the J12:
CCM Tech Video - J12 - Part One - Tools of the Trade.
CCM Tech Video - Part Two - J12 - Grip Frame and ASA.
CCM Tech Video - Part Three - J12 - Pump Handle and Valve Assembly.
CCM Tech Video - Part Four - J12 - Regulator Assembly.
CCM Tech Video - Part Five - J12 - Hammer Assembly.
CCM Tech Video - Part Six - J12 - Testing the Regulator.
Here is the Video Series for the T2:
CCM T2 Tech Video - Part One - Tools of the Trade.
CCM T2 Tech Video - Part Two - Grip Frame.
CCM T2 Tech Video - Part Three - Top Tube.
CCM T2 Tech Video - Part Four - Bottom Tube.
CCM Regulator Tech Video.
CCM T2 Tech Video - Part Five - Timing and Settings.
Here is the video series for the Series 6.5:
CCM Tech Video S5, S5B, S6, S6.5, J2L - Tools of the Trade.
CCM Tech Video - Series 6.5 Grip Frame.
CCM Tech Video - Regulator.
CCM Tech Video - Series 6.5 Top Tube.
CCM Tech Video - Series 6.5 Bottom Tube - Timing, and Set Up.
Here is the Video Series for the Series 5, Series 5 Basic, Series 6, and J2L:
CCM Tech Video - Tools of the Trade.
CCM Tech Video - S5, S5B, S6, J2L Grip Frame.
CCM Tech Video - Regulator.
CCM Tech Video - S5, S5B, S6, J2L - Finishing the Grip Frame and Top Tube.
CCM Tech Video - S5, S5B, S6, J2L - The Bottom Tube, Timing, and Set Up.
Here is the Video Series for the SS25 and the S6P:
CCM Tech Video - SS25, S6P Tools of the Trade.
CCM Tech Video - SS25, S6P Grip Frame
CCM Tech Video - Regulator
CCM Tech Video - SS25, S6P - Top Tube
CCM Tech Video - SS25, S6P - Bottom Tube.
CCM Tech Video - SS25 - Timing and Set Up.
Miscellaneous Tech Videos:
CCM Tech Video - Universal Air Fittings - How to Assemble and Tech.
CCM Tech Video - Barrel Leaks and 'Chuffing' - How to Fix It.
CCM Tech Video - Shooting Down During Auto Trigger - How to Fix It.
CCM Tech Video - How to Tech your Valve.
CCM Tech Video - Teching Your Valve.
CCM Tech Video - Teching Your Hammer.
CCM Tech Video - How to install a Deluxe kit on a 'cocker.
CCM Tech Video: Buffing Moving Parts.
CCM Tech Video: How to Make a Cleaning Solution.
CCM Tech Video: How to Make a Reg Tester.
CCM Tech Video: How to Remove the Feedneck from the CCM Marker.
Here is the old video series done in 2009 on how to tech the CCM S6, S5, S5B, J2L:
Video #1 - What Tools, Lubricants, and Sealants are needed to work on a CCM marker.
Video #2 - How to Set the Velocity on a CCM Marker.
Video #3 - How to Set the Timing on a CCM Marker.
Video #4 - How to Clean the Marker After a Day of Play.
Video #5 - How to Tech and Clean the CCM Regulator.
Video #6 - How to Clean and Tech the CCM Grip Frames.
Video #7 - Hammer and Valve Disassembly - Part One.
Video #8 - Hammer and Valve Disassembly - Part Two.
Video #9 - Final Assembly, Test, and Tech Tricks.
Lastly, here is the thread on 'How to make a parts Kit'.
Last edited by Talfuchre; 02-23-2013 at 10:48 PM.
|10-27-2009, 09:05 PM||#6 (permalink)|
Join Date: Apr 2009
Found what I assume are a couple typos in the T2 manual:
Third Paragraph: You tell the reader to turn the IVG three full turns in from the back of the marker in the first sentence, then two full rotations in the second sentence.
Fourth Paragraph, second line: "not the average of the string", should that be "note the average of the string"?
|02-11-2011, 09:38 PM||#8 (permalink)|
starts off small at first
Join Date: Apr 2006
Location: Bean Town, U.S.A.
VID#3 really came in handy. Been so long sice I timed the bolt, I'd forgotten how too. Or is it I'm just gettin too old?
Well, thanks TF Jason
"Democracy is the worst form of government except for all the others which have been tried." Winston Churchill
THE-SHOOTIST Anyone chubbin' like me for this?
mailmanmike Since Monday! That's more than 4 hours though, so according to those cialis ads I should see my doctor.
tlane77 I think for a non-chemical chubby it's 6 hours before its time to see a doctor. So you should be good for another couple hours.
splattttttt I wasn't goin to google "chubbin" because I assumed it had to do with fat. The lard type, not the fun stuff. But what ever feelings Jeff's experiencing, then they must be of the fun like stuff...
tlane77 He's got a woody for your woods.
|04-19-2011, 06:00 PM||#9 (permalink)|
After watching all the videos I only have one question, what is recomended for the s6.5 hammer? No oil like the t2, or light oil like the s6?
Milwaukee Throwback(kinda...its really complicated)
|04-19-2011, 06:15 PM||#10 (permalink)|
I use triflow on my s6.5 hammer. at 300 psi reg input, my IVG is all the way out.
"Originally posted by Element Paintball@pbnation: you realize it would be easier to get a new wife than a new dc2."
My MCB Feedback
|Thread Tools||Search this Thread|