Paintball

[Talfuchre]

Here is the master link to all the manuals I have written so far"

Index of CCM Manuals

I made one for:

Series 5, and Series 6.
SS25 and Series 6 Prototype
T2
Series 6.5
The Economy Pump Kit.
The Deluxe Pump Kit.
The Grip Frame and Deluxe Kit.
The Internals Kit.
The CCM Regulator.
The Macro Line Fittings
And a Quick Start Guide to go into the box of every marker.

Here is the list of Video's on how to tech the CCM S6, S5, S5B, J2L:

Video #1 - What Tools, Lubricants, and Sealants are needed to work on a CCM marker.

Video #2 - How to Set the Velocity on a CCM Marker.

Video #3 - How to Set the Timing on a CCM Marker.

Video #4 - How to Clean the Marker After a Day of Play.

Video #5 - How to Tech and Clean the CCM Regulator.

Video #6 - How to Clean and Tech the CCM Grip Frames.

Video #7 - Hammer and Valve Disassembly - Part One.

Video #8 - Hammer and Valve Disassembly - Part Two.

Video #9 - Final Assembly, Test, and Tech Tricks.

Lastly, here is the thread on 'How to make a parts Kit'.

T2 Tech Video's






TF

[Brad Krodel]

I just bought a new J2L and am awaiting it's arrival. Should I refer to the manual for the S5 & S6 to learn about it's operation and how to maintain it?

Thanks,
Bra Krodel

[Talfuchre]

The Series 6 Manual is will be exactly the same.

TF

[Brad Krodel]

Thanks.

[slowerpig81]

I found an error in the T2 manual. The right side schematic is labeled as "III. The CCM® Series 6 (Facing Right)" Should be T2 of course.

[BabelFish]

Found what I assume are a couple typos in the T2 manual:

Page 11:

Third Paragraph: You tell the reader to turn the IVG three full turns in from the back of the marker in the first sentence, then two full rotations in the second sentence.

Fourth Paragraph, second line: "not the average of the string", should that be "note the average of the string"?

[Talfuchre]

Thanks Babel!

TF

[splattttttt]

VID#3 really came in handy. Been so long sice I timed the bolt, I'd forgotten how too. Or is it I'm just gettin too old?
Well, thanks TF Jason

[evilkid94]

After watching all the videos I only have one question, what is recomended for the s6.5 hammer? No oil like the t2, or light oil like the s6?

Thanks

[noclue119]

Originally Posted by evilkid94

After watching all the videos I only have one question, what is recomended for the s6.5 hammer? No oil like the t2, or light oil like the s6?

Thanks

I use triflow on my s6.5 hammer. at 300 psi reg input, my IVG is all the way out.