Approx. CCM reg pressure?

Andrewliu6294 · 03-29-2008, 09:54 PM

Is there any way of telling the approximate pressure of the CCM reg (newest style milling, on S6's) based on number of turns from flush?

I know you can do this for palmers regs, but I know nothing for these.

I dont have a gauge port.

hvacman250 · 03-29-2008, 10:08 PM

Flush is ~300-350 (ish)...kinda, I think.

Most CCMs I have seen are near flush plus a half turn or so in.

Talfuchre · 03-31-2008, 09:05 PM

Flush is about 300.

TF

03-29-2008, 09:54 PM	#1 (permalink)
Andrewliu6294 Active Member Join Date: Aug 2007 Posts: 345	Approx. CCM reg pressure? Is there any way of telling the approximate pressure of the CCM reg (newest style milling, on S6's) based on number of turns from flush? I know you can do this for palmers regs, but I know nothing for these. I dont have a gauge port.

03-29-2008, 10:08 PM	#2 (permalink)
hvacman250 www.pbpumpshop.com Join Date: Nov 2006 Posts: 832	Flush is ~300-350 (ish)...kinda, I think. Most CCMs I have seen are near flush plus a half turn or so in. __________________ Feedback

03-31-2008, 09:05 PM	#3 (permalink)
Talfuchre Moderator to Chef Dave! Join Date: May 2006 Posts: 2,920	Flush is about 300. TF __________________ Pumpenstein - NSA National Champions 2006 TF's MCB Trust.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search