mcarterbrown.com

mcarterbrown.com (http://www.mcarterbrown.com/forums/)
-   CCM (http://www.mcarterbrown.com/forums/ccm/)
-   -   How to build a CCM SS-25 / S6P & S5 / S5B / S6 Parts kit. (http://www.mcarterbrown.com/forums/ccm/36798-how-build-ccm-ss-25-s6p-s5-s5b-s6-parts-kit.html)

Talfuchre 04-04-2008 10:43 AM

How to build a CCM SS-25 / S6P & S5 / S5B / S6 Parts kit.
 
Thanks to Rod from CCM I now have a complete parts kit.

http://i143.photobucket.com/albums/r...artsKit001.jpg

http://i143.photobucket.com/albums/r...artsKit002.jpg

I have way to many parts for the average user however - so I decided to build a list of necessities that should cure all of your CCM needs for your personal markers.

I will break these lists into two categories - the SS25 / Series 6 Prototype list and a second list for the Series 5, Series 5 Basic, and Series 6 markers. Items in italics are not necessary but nice to have.

SS25 / S6P List:

SS25 Valve Body (1)
Valve Body O-Rings (4) N70 015
Valve Plug O-Ring (1)
Spring Detent (For SS25) (1)
Timmy Rubber Detents (For S6P) (2)
Pump Kit O-Rings (2) N70 113
Auto Trigger Screw (1)
Grip Frame Screws (2) be sure to get one for the front and one for the rear - they are different.
IVG O Ring (1) N70 013
Main and Valve Springs (1 Each)
Valve Stem Assembly (1)
Valve Stem o-ring (2) N90 007
Bolt Pin O-Ring (1) N90 009
Hammer Nylon Set Screw (2)
Cocking Rod Bumper (4) these are also used in the hammer
Regulator Half O-ring (1) N70 017
Reg Piston O-Ring (2) N70 113
Regulator Poppit O-ring (2) N90 006
If you use a CCM ASA - Reg ASA o-ring (2) N70 007

Tools needed:

Full set of high quality allen keys
Adjustable Wrench
Needle nose pliers
O-Ring pick
Dow 33 Grease (H8tr sauce is nice too)
KC Concepts Blue oil (other high quality oil works well)
1/2 dowel cut at 1 foot length (this is used to push out your valve body if needed)
Blue and Red Loc-Tite

S5 / S5B / S6P

Series 5 Valve Body (1)
Valve Body O-Rings (1) N70 011
Spring Detent (For S5, S5B) (1)
Timmy Rubber Detents (For S6P) (2)
Pump Kit O-Rings (for S5) (2) N70 113
Pump Kit O-Rings (For S6) (2) N70 015
Auto Trigger Screw (1)
Grip Frame Screws (2) be sure to get one for the front and one for the rear - they are different.
IVG O Ring (1) N70 013
Main and Valve Springs (1 Each)
Valve Stem Assembly (1)
Valve Stem o-ring (2) N90 007
Bolt Pin O-Ring (1) N90 009
Hammer Nylon Set Screw (2)
Cocking Rod Bumper (4) these are also used in the hammer
Regulator Half O-ring (1) N70 017
Reg Piston O-Ring (2) N70 113
Regulator Poppit O-ring (2) N90 006
If you use a CCM ASA - Reg ASA o-ring (2) N70 007

Tools Needed:


Full set of high quality allen keys
'Cocker Valve Removal Tool
Adjustable Wrench
Needle nose pliers
O-Ring pick
Dow 33 Grease (H8tr sauce is nice too)
KC Concepts Blue oil (other high quality oil works well)
Blue and Red Loc-Tite

Here is how this parts kit might look when done:

http://i143.photobucket.com/albums/r...artsKit003.jpg

http://i143.photobucket.com/albums/r...artsKit004.jpg


I think this is complete - this should have you in good condition for anything that the manual says you need to fix. Call CCM for any of these parts - they have a full supply and I am sure will be more than happy to help you. I have also included the o-rings sizes as I knew them (the information was also gleaned from Rod at CCM) - you should be able to find these at a local parts store.

Please post up anything I might have missed and I will add.

TF

CCMachinist 04-04-2008 01:51 PM

hey,TF.If you have any extra parts I would like to buy some.

CCM CHICK 04-04-2008 01:53 PM

Shoot man... your parts kit look better than ours! Good deal! :thumbup:

aqua_scummm 04-04-2008 01:55 PM

That's a lot of individual parts :(


No valve tool needed for the S5/S6 etc?

Talfuchre 04-04-2008 06:37 PM

Good call. I will add it.

Bill,

Call me if you want - I have a great deal on some parts. I don't have a parts kit - I have 'inventory'. ;)

TF

Milkshake 04-04-2008 09:31 PM

1 Attachment(s)
Is that for the new s6 style SS25? or the older ones? Duh, just really read the post, brain dead I guess. Thanks, this will be a big help.

hvacman250 04-04-2008 09:35 PM

Quote:

Originally Posted by sp8nsc (Post 361871)
Is that for the new s6 style SS25? or the older ones?

You're gonna have a mix between the two.

And Tal, you have OCD real bad :) CCM guns dont break; why do you need a parts kit? :confused::p

Spoon 01-07-2009 11:03 AM

Sorry to resurrect such an old thread but I've referenced it a few times and I have a question.

I want to put together a rebuild kit for my S5. I was looking to get the o-rings from markerkits.com.

There are a few 90 durometer rings in the kits but I only see 70 at markerkits.com. Could I use the 70's or is there a place I can get everything I need for my S5?

Thanks

DarkArmorPB 01-07-2009 03:42 PM

Gah! TF's kit is nicer then mine. I have all of my o-rings thrown into one compartment. Same as my screws. My guys keep stealing my screws though. The bums. :D


DA.

JOESPUD27 01-07-2009 04:20 PM

Quote:

Originally Posted by DarkArmorPB (Post 649039)
My guys keep stealing my screws though. The bums. :D


DA.

Sorry. :(

Jay


All times are GMT -4. The time now is 12:27 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC