CCM reg

DCB · 05-05-2008, 04:16 PM

On the CCM regulator which way do you adjust for the velocity to go up (or down)? Screw it in or out?

Thanks

Peace

spymongoose · 05-05-2008, 04:38 PM

screws in to increase pressure, out to reduce pressure. How that affects velocity depends on other factors, if pressure goes above a certian point velocity goes down.

Old Man · 05-05-2008, 09:48 PM

Attention!!!You do not adjust velocity through the reg...It is done through the IVG.

DCB · 05-05-2008, 09:52 PM

I know that.... it's just that most regs adjust in different directions... just needed to know + and -.

Peace

Talfuchre · 05-05-2008, 10:10 PM

IN is UP.

Here is the manual.

http://www.pumpenstein.com/manuals/C...tor_Manual.pdf

TF

DCB · 05-14-2008, 03:21 PM

Do they handle CO2 well... on a pump mind you.

Peace

Andrewliu6294 · 05-14-2008, 03:54 PM

Yes they do, very well.

As far as I know, the internals are nearly identical to a Bob Long Torpedo. I've been running CO2 through mine for a while now with now issues.

Cunha · 05-14-2008, 04:06 PM

And the bob long torpedo is a stabilizer copy - which translates to a decent design

except it is strange that these regulators do not work well except at a pretty small sweet spot.

Talfuchre · 05-17-2008, 09:33 AM

The stab seemed a basic copy of the Rg-1. I hate to be play chicken and egg on this one - regulators had been around before paintball.

TF

dv8 · 05-27-2008, 08:41 PM

Kinda goin off on a tangent, but I just got an S6 in today and noticed how the reg is kinda loose in the adapter? I havent aired it up yet, but will it leak that way? If I tighten it all the way the fitting is way off toward the front of the marker. I seem to remember something about using an extra o-ring to adjust where the fitting ends up. True? Thanks for the help, just seems kinda weird to have it all floppy like it is.

05-05-2008, 04:16 PM	#1 (permalink)
DCB Pumper Join Date: Apr 2006 Location: Jax, FL Posts: 1,072	CCM reg On the CCM regulator which way do you adjust for the velocity to go up (or down)? Screw it in or out? Thanks Peace __________________ DCB<>< John 14:6 CPPA #1092 Pump Gun Pimp #80 LPPC #164 Feedback http://www.mcarterbrown.com/forums/f...html#post78710 Gallery http://www.mcarterbrown.com/gallery/...er=184&cat=500

05-05-2008, 04:38 PM	#2 (permalink)
spymongoose Pump Ninja Join Date: Apr 2007 Location: Vegas Baby! Posts: 783	screws in to increase pressure, out to reduce pressure. How that affects velocity depends on other factors, if pressure goes above a certian point velocity goes down. __________________ My Feedback My Gallery

05-05-2008, 09:48 PM	#3 (permalink)
Old Man Rec Poster Join Date: Jan 2008 Location: Redding Ca Posts: 89	Attention!!!You do not adjust velocity through the reg...It is done through the IVG. __________________ www.chipleymachine.com Topstitch.net

05-05-2008, 09:52 PM	#4 (permalink)
DCB Pumper Join Date: Apr 2006 Location: Jax, FL Posts: 1,072	I know that.... it's just that most regs adjust in different directions... just needed to know + and -. Peace __________________ DCB<>< John 14:6 CPPA #1092 Pump Gun Pimp #80 LPPC #164 Feedback http://www.mcarterbrown.com/forums/f...html#post78710 Gallery http://www.mcarterbrown.com/gallery/...er=184&cat=500

05-05-2008, 10:10 PM	#5 (permalink)
Talfuchre Moderator to the GODS! Join Date: May 2006 Posts: 2,475	IN is UP. Here is the manual. http://www.pumpenstein.com/manuals/C...tor_Manual.pdf TF __________________ Pumpenstein - NSA National Champions 2006 Buy Official Team Pumpenstein gear HERE TF's MCB Trust.

05-14-2008, 03:21 PM	#6 (permalink)
DCB Pumper Join Date: Apr 2006 Location: Jax, FL Posts: 1,072	Do they handle CO2 well... on a pump mind you. Peace __________________ DCB<>< John 14:6 CPPA #1092 Pump Gun Pimp #80 LPPC #164 Feedback http://www.mcarterbrown.com/forums/f...html#post78710 Gallery http://www.mcarterbrown.com/gallery/...er=184&cat=500

05-14-2008, 03:54 PM	#7 (permalink)
Andrewliu6294 Active Member Join Date: Aug 2007 Posts: 282	Yes they do, very well. As far as I know, the internals are nearly identical to a Bob Long Torpedo. I've been running CO2 through mine for a while now with now issues.

05-14-2008, 04:06 PM	#8 (permalink)
Cunha MCB Member Join Date: Apr 2006 Location: Monterey, CA Posts: 3,908	And the bob long torpedo is a stabilizer copy - which translates to a decent design except it is strange that these regulators do not work well except at a pretty small sweet spot. __________________ If you're not moving, there is no movement. New style Sterling STP for sale

05-17-2008, 09:33 AM	#9 (permalink)
Talfuchre Moderator to the GODS! Join Date: May 2006 Posts: 2,475	The stab seemed a basic copy of the Rg-1. I hate to be play chicken and egg on this one - regulators had been around before paintball. TF __________________ Pumpenstein - NSA National Champions 2006 Buy Official Team Pumpenstein gear HERE TF's MCB Trust.

05-27-2008, 08:41 PM	#10 (permalink)
dv8 Newbie Join Date: Feb 2008 Location: Virginia Posts: 28	Kinda goin off on a tangent, but I just got an S6 in today and noticed how the reg is kinda loose in the adapter? I havent aired it up yet, but will it leak that way? If I tighten it all the way the fitting is way off toward the front of the marker. I seem to remember something about using an extra o-ring to adjust where the fitting ends up. True? Thanks for the help, just seems kinda weird to have it all floppy like it is. __________________ Mal: My work's illegal, but at least it's honest. Feedback

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search