86'frame on a cocker

Sly1 · 07-15-2008, 03:43 AM

Is there any way to modify the newer 86' frames to work on a cocker with pneumatics? I think a person would have to drill another hole near where the at one is in order to actuate the 3way..

anyway, it'd be a cool cocker if it got finished with one of these

f1zz · 07-15-2008, 03:59 AM

I think it won't work, as the trigger itself is not a traditional slider.

You can see the trigger is held by a pin to the right of the AT hole. It pivots and is not a slider. You need one of the older model delrin sliders in order for it to work.

Sly1 · 07-15-2008, 12:39 PM

Thats what I was afraid of... it seems like there would be a place somewhere where I could mill a slot and make it work.. possibly with a custom 3way rod..

Contour · 07-15-2008, 01:12 PM

You could do a pneumatic trigger set up with it. However I've still got to test that idea myself.

Sly1 · 07-15-2008, 01:36 PM

like put the 3way in the frame? I guess thats a possibility

Brick · 07-15-2008, 03:24 PM

Quote:

Originally Posted by f1zz

I think it won't work, as the trigger itself is not a traditional slider. http://i3.ebayimg.com/07/i/000/fa/31/0d92_1.JPG
You can see the trigger is held by a pin to the right of the AT hole. It pivots and is not a slider. You need one of the older model delrin sliders in order for it to work.

That doesn't matter. There are hinge frames made just for pneu's. The 86 won't work on a mech cocker without mods, but more frames than just the sliders will work on mech cockers.

chefboi17 · 07-15-2008, 03:34 PM

yeah, if you want a single finger swing on a mech, you should look into getting a dye frame

Sly1 · 07-15-2008, 04:21 PM

yeah.. if there was an 86' dye, I'de jump on it.. I just think it'd be a cool one

Gunslinger · 07-16-2008, 11:33 AM

What if you reverse the autotrigger lever out to the right side of the frame and make a 3-way rod that attaches to that? I do not have my frame in front of me so I would have to look at it myself but its an option.

Or if you know someone with a mill that can fab a trigger for you with the 3-way slot you could be getting somewhere. then you just have to slot the frame. See the old S5 and J2 frames for ref.

Too many ideas in my head.

Andrewliu6294 · 07-16-2008, 09:32 PM

pulling the trigger will not actuate the AT cam. I know, I tried.

pulling the AT cam however, WILL cause the trigger to move.

07-15-2008, 01:12 PM	#4 (permalink)
Contour Active Member Join Date: Jun 2007 Posts: 274	You could do a pneumatic trigger set up with it. However I've still got to test that idea myself. __________________ PB4L Industries Vertebrae, hybrid rival, orracle, 2 2k3 snipers and a phantom F/S/T! Tons of cocker parts, slider, pneumatics, internals, tons of stuff!!

07-15-2008, 03:34 PM	#7 (permalink)
chefboi17 Active Member Join Date: Dec 2007 Location: toronto ontario canada Posts: 209	yeah, if you want a single finger swing on a mech, you should look into getting a dye frame __________________ tdotballers feedback pbn feedback pump fiction raiders cup tournament series, pump division- 1st place

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

07-15-2008, 03:59 AM	#2 (permalink)
f1zz Herald of Unicron Join Date: Mar 2008 Location: Dorchester, MA Posts: 127	I think it won't work, as the trigger itself is not a traditional slider. You can see the trigger is held by a pin to the right of the AT hole. It pivots and is not a slider. You need one of the older model delrin sliders in order for it to work.

07-16-2008, 11:33 AM	#9 (permalink)
Gunslinger Newbie Join Date: Apr 2008 Location: Chicagoland USA Posts: 15	What if you reverse the autotrigger lever out to the right side of the frame and make a 3-way rod that attaches to that? I do not have my frame in front of me so I would have to look at it myself but its an option. Or if you know someone with a mill that can fab a trigger for you with the 3-way slot you could be getting somewhere. then you just have to slot the frame. See the old S5 and J2 frames for ref. Too many ideas in my head.

07-16-2008, 09:32 PM	#10 (permalink)
Andrewliu6294 Active Member Join Date: Aug 2007 Posts: 325	pulling the trigger will not actuate the AT cam. I know, I tried. pulling the AT cam however, WILL cause the trigger to move.