News from CCM!

CCM CHICK · 07-25-2008, 08:04 PM

Happy Friday guys!

So, as of today we are proud to release our new Auto Trigger Retaining System.

It is basically a spring and ball bearing that get placed in a drilled hole on the frame. The purpose it to keep the A/T placement nice a snug with no shifting or moving no matter what position the gun is being held/fired in.

Here is a picture so you have a better idea of what it is I am talking about.

http://img168.imageshack.us/img168/8...atsetupyp3.jpg

It is important for anyone who gets the new style to know it is VERY EASY to lose the spring and bearing when removing your frame, so you will want to be aware of the two small parts. Otherwise, we will sell replacement parts if needed.
Thanks guys and I hope you have a great weekend!

Shane-O · 07-25-2008, 08:19 PM

Nice!

Brick · 07-25-2008, 08:35 PM

Aw man, and I had hopes thigns were official on the modular sniper

fasteddy · 07-25-2008, 11:11 PM

Do the older frames have the hole already drilled in the frame?

Just wondering,

Eddy

CCmachinist · 07-25-2008, 11:34 PM

Quote:

Originally Posted by fasteddy

Do the older frames have the hole already drilled in the frame?

Just wondering,

Eddy

No they are not.It also would not be economical to retro fit one either.Best advice.Keep your old one. Or, if you don't have equipment to do it your self.Sell your old one and buy the new one.

Grivooga · 07-25-2008, 11:39 PM

I would so tap that hole and put a tiny little grub screw in it like I did with the safety on my PGP frame or I would lose that spring and ball for sure. A little strip of scotch tape might be all you need though.

fasteddy · 07-26-2008, 12:49 PM

I always wondered why you guys didn't just put a snap ring or c-clip on the other side. I digress, I guess it takes away from the clean look.

Eddy

Garbageman705 · 07-26-2008, 02:44 PM

Well they have that screw in the bottom of grip frame to hold it in. But then you can't adjust your trigger sloppy. You can also put a small o-ring on the cam screw to the pump arm.

Stainlessbutcher · 07-27-2008, 03:21 PM

So any of you guys that are looking to upgrade, holler at me. I'd be interested in one of these "take off" frames. (I have a mill and I know how to use it)....

B.

Quote:

Originally Posted by CCmachinist

No they are not.It also would not be economical to retro fit one either.Best advice.Keep your old one. Or, if you don't have equipment to do it your self.Sell your old one and buy the new one.

zeroae86 · 08-02-2008, 04:04 AM

i just searched your whole site and can't find this thing...when is this up for sale????cause i'm really interested...thanks...i should get some sleep..pumpers pandemonium is tomorrow...wish CCM was there..anyway thanks

07-25-2008, 08:04 PM	#1 (permalink)
CCM CHICK The chick @ CCM Join Date: Sep 2007 Location: Far- Nor-Cal	News from CCM! Happy Friday guys! So, as of today we are proud to release our new Auto Trigger Retaining System. It is basically a spring and ball bearing that get placed in a drilled hole on the frame. The purpose it to keep the A/T placement nice a snug with no shifting or moving no matter what position the gun is being held/fired in. Here is a picture so you have a better idea of what it is I am talking about. http://img168.imageshack.us/img168/8...atsetupyp3.jpg It is important for anyone who gets the new style to know it is VERY EASY to lose the spring and bearing when removing your frame, so you will want to be aware of the two small parts. Otherwise, we will sell replacement parts if needed. Thanks guys and I hope you have a great weekend!

07-25-2008, 08:35 PM	#3 (permalink)
Brick Seasoned Member Join Date: Oct 2007	Aw man, and I had hopes thigns were official on the modular sniper __________________ WTB: ATS MAGS so I can be one of the cool kids ~PumpFiction~ -

07-25-2008, 11:39 PM	#6 (permalink)
Grivooga Active Member Join Date: Sep 2007 Location: Tampa, FL	I would so tap that hole and put a tiny little grub screw in it like I did with the safety on my PGP frame or I would lose that spring and ball for sure. A little strip of scotch tape might be all you need though. __________________ Clinton - Feedback 0/0, Tampa Bay Ground Pounders, Blitzkrieg Paintball - Lutz, FL Gun-whore in training.

07-26-2008, 02:44 PM	#8 (permalink)
Garbageman705 MCB Member Join Date: Jan 2008	Well they have that screw in the bottom of grip frame to hold it in. But then you can't adjust your trigger sloppy. You can also put a small o-ring on the cam screw to the pump arm. __________________ WTB old, unique or just plain cool jerseys.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

07-25-2008, 11:11 PM	#4 (permalink)
fasteddy Active Member Join Date: Apr 2008 Location: FL	Do the older frames have the hole already drilled in the frame? Just wondering, Eddy

07-26-2008, 12:49 PM	#7 (permalink)
fasteddy Active Member Join Date: Apr 2008 Location: FL	I always wondered why you guys didn't just put a snap ring or c-clip on the other side. I digress, I guess it takes away from the clean look. Eddy

08-02-2008, 04:04 AM	#10 (permalink)
zeroae86 MCB Member Join Date: Feb 2008 Location: south jersey	i just searched your whole site and can't find this thing...when is this up for sale????cause i'm really interested...thanks...i should get some sleep..pumpers pandemonium is tomorrow...wish CCM was there..anyway thanks