mcarterbrown.com  

CCM Chipley Machine

Reply
 
Thread Tools Search this Thread
Old 09-29-2008, 06:48 PM   #1 (permalink)
Seasoned Member
 
rdogx78's Avatar
 
Join Date: Jun 2008
Location: Tucson, AZ

Lower Tube Kit

So I've been looking for an upgrade to put into my wgp 2k3 sniper. A buddy told me about a CCM lower tube kit. I read about it in a somewhat short review on it. With a hefty cost of ~$70, what kind of benefits will I get? Is it a specific valve/spring setup for pumps? Will these internals basically transform my sniper into half a CCM series 5? Will it eliminate the burp with the spring setup? Any input is appreciated. I know I could just pick up some AKA or madman springs and monkey with them to fine tune the pump, but don't really have the time to do it.
rdogx78 is offline   Reply With Quote
Old 09-30-2008, 06:45 PM   #2 (permalink)
Red
 
Talfuchre's Avatar
 
Join Date: May 2006

CCM Fan
Check pumpenstein.com and there is a review of the internals on there - it is in an upgrades post.

TF
__________________
Pumpenstein - NSA National Champions

TF's MCB Trust.
Talfuchre is offline   Reply With Quote
Old 09-30-2008, 10:20 PM   #3 (permalink)
Rec Poster
 
Join Date: Aug 2008
Location: Jacksonville

Quote:
Originally Posted by rdogx78 View Post
So I've been looking for an upgrade to put into my wgp 2k3 sniper. A buddy told me about a CCM lower tube kit. I read about it in a somewhat short review on it. With a hefty cost of ~$70, what kind of benefits will I get? Is it a specific valve/spring setup for pumps? Will these internals basically transform my sniper into half a CCM series 5? Will it eliminate the burp with the spring setup? Any input is appreciated. I know I could just pick up some AKA or madman springs and monkey with them to fine tune the pump, but don't really have the time to do it.
I have CCM internals in my 2k5 superstock, I can make it burp or pffffffft with different pressures/ivg adjustments, mine runs healthily(but not efficiently) at 210-220 psi, shooting about 280 with the IVG about 1-1.5 turns in, the pump is butta smooth and light as a feather.
Pumpoison is offline   Reply With Quote
Old 09-30-2008, 10:23 PM   #4 (permalink)
Slowly making progress
 
desertT1's Avatar
 
Join Date: Apr 2008
Location: Vail, AZ

Quote:
Originally Posted by Pumpoison View Post
I have CCM internals in my 2k5 superstock, I can make it burp or pffffffft with different pressures/ivg adjustments, mine runs healthily(but not efficiently) at 210-220 psi, shooting about 280 with the IVG about 1-1.5 turns in, the pump is butta smooth and light as a feather.
Can you run it with pneus as well? If so, does it run well?
__________________
>>> Link to prototype Dust Devil<<<

DT1 Dust Devil want list. Click me!
Quote:
Originally Posted by neftaly View Post
New advertising tagline: "Simon Stevens said that will be totally fine and nothing bad could ever happen. Ever."
Feedback
desertT1 is offline   Reply With Quote
Old 09-30-2008, 10:37 PM   #5 (permalink)
Rec Poster
 
Join Date: Aug 2008
Location: Jacksonville

I don't see why you couldn't, but I've heard people don't like heavy hammers with pneu's, and the CCM hammer is a good bit heavier than the stock one.
Pumpoison is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » CCM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 04:59 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC