mcarterbrown.com  

CCM Chipley Machine

Reply
 
Thread Tools Search this Thread
Old 06-29-2009, 02:58 PM   #21 (permalink)
Active Member
 
Join Date: Jul 2007

What would be the cost to have older frames retrofitted with either a spring/ball combo or pin? I have an S6 (w/ 86 frame) that I bought a few years back and the frame doesn't have neither. Every once in a while, the trigger would get stuck because the cam would slightly move out. Thanks
pntballgunz is offline   Reply With Quote
Old 06-29-2009, 04:00 PM   #22 (permalink)
Here we go again...
 
fastev's Avatar
 
Join Date: Oct 2006
Location: San Jose, CA

Quote:
Originally Posted by pntballgunz View Post
What would be the cost to have older frames retrofitted with either a spring/ball combo or pin? I have an S6 (w/ 86 frame) that I bought a few years back and the frame doesn't have neither. Every once in a while, the trigger would get stuck because the cam would slightly move out. Thanks
No need to retrofit the frame (which CCM will not do anyways). Put a small o-ring on the screw that attaches the AT lever to the pump arm
__________________
*feedback*
fastev is offline   Reply With Quote
Old 06-29-2009, 08:10 PM   #23 (permalink)
Active Member
 
Join Date: Jul 2007

Thanks...I'll give that a try!
pntballgunz is offline   Reply With Quote
Old 06-30-2009, 03:55 PM   #24 (permalink)
Ran out of characters.
 
mtaylor's Avatar
 
Join Date: Feb 2008
Location: Canmore, Alberta

CCM Fan
Welcome to the wonderful world of tiny balls and springs

I put little piece of tape over the spring on sheridan safeties, which are basically the same concept. I'd bet that would work for you.
__________________
Quote:
Originally Posted by Painthappy
Somethang straight-up wrong.. well, went wrong. Us thugs will now sack dem involved.
How to get around UPS fees
mtaylor is offline   Reply With Quote
Old 06-30-2009, 04:47 PM   #25 (permalink)
Seasoned Member
 
Join Date: Dec 2006

Thumbs up

I've had the same problem with my older 86* frames & sometimes I use an O ring as Fastev suggested but lately I've made thin washers from some old thin-walled Macroline. Sliced with a razorblade in the thickness required. On the BM. Side benefit, no anno wear.

__________________
Unconscious Incompetent: You don't have enough knowledge to even realize you can't perform a given task.
Conscious Incompetent: You gain just enough knowledge and skill to realize that you suck at a given task.
Conscious Competent: You gain skill through practice and eventually can do a fair job at a given task with a lot of conscious effort and thought.
Unconscious Competent: Eventually, after enough practice, the given task will become second nature and it will no longer feel "uncomfortable".

Feedback:http://www.mcarterbrown.com/forums/f...-feedback.html


Last edited by Yomama101; 06-30-2009 at 04:51 PM.
Yomama101 is offline   Reply With Quote
Reply

  mcarterbrown.com » Paintball » The Armory » CCM

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 07:06 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO
© MCB Network LLC