WAS board info for a project

Artimis · 03-09-2007, 09:03 PM

I'm doing a dual-noid project and lacking in the board area (at least until they release the mini-morlock......if ever).

Anyway, does anyone know if the WAS board for an AKA Excal/Viking is capable of driving an SMC noid for an E1/E2 or a Humphrey noid for a timmy?

Rainman229 · 03-11-2007, 05:22 PM

Excal is dual noid and should work for your needs.

the older excals had mac valves. if they can power a mac they can power anything. Shouldn't have a problem powering any 5v valve.

Artimis · 03-11-2007, 07:12 PM

Thanks again as always!

This is actually for phase 3 of that semi-pgp you did such beautiful work on.

TornadoAlley · 03-16-2007, 05:09 AM

You might look into the Pandora board from VaporWorks. I know Sam was offering a great deal on the board and programming cable combo. I am going to use one on a project I am working on.

Artimis · 03-16-2007, 01:45 PM

Do you happen to know the dimension of those boards? I need something fairly small......

03-09-2007, 09:03 PM	#1 (permalink)
Artimis Active Member Join Date: Feb 2007	WAS board info for a project I'm doing a dual-noid project and lacking in the board area (at least until they release the mini-morlock......if ever). Anyway, does anyone know if the WAS board for an AKA Excal/Viking is capable of driving an SMC noid for an E1/E2 or a Humphrey noid for a timmy? __________________ -Artimis MCB Feedback PBN Feeback My Current Collection

03-11-2007, 05:22 PM	#2 (permalink)
Rainman229 Airsmith to the Gods Join Date: Apr 2006 Location: nj	Excal is dual noid and should work for your needs. the older excals had mac valves. if they can power a mac they can power anything. Shouldn't have a problem powering any 5v valve. __________________ Email lastone75@aol.com Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229

03-11-2007, 07:12 PM	#3 (permalink)
Artimis Active Member Join Date: Feb 2007	Thanks again as always! This is actually for phase 3 of that semi-pgp you did such beautiful work on. __________________ -Artimis MCB Feedback PBN Feeback My Current Collection

03-16-2007, 01:45 PM	#5 (permalink)
Artimis Active Member Join Date: Feb 2007	Do you happen to know the dimension of those boards? I need something fairly small...... __________________ -Artimis MCB Feedback PBN Feeback My Current Collection

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

03-16-2007, 05:09 AM	#4 (permalink)
TornadoAlley Rec Poster Join Date: Jul 2006	You might look into the Pandora board from VaporWorks. I know Sam was offering a great deal on the board and programming cable combo. I am going to use one on a project I am working on.