|
             |
 |
|
| Custom Projects / Custom Questions How do I customize? What do I customize? What do I use? Share you experiences and faults here! |
 |
| | LinkBack | Thread Tools | Search this Thread |
04-09-2007, 02:45 AM
| #1 (permalink) |
| Newbie  Join Date: Jan 2007 Location: salt lake city | P-68 with vert 12 gram I was board tonight, so with my P-68AT...I took off the Autotrigger, swapped the pump handle out with the shorter PGP pump. Next, cut up a Duckbill ASA, attached it the the trigger frame and...Shazzam!, a vert 12 gram.[IMG]  [/IMG] |
|  |
|
04-09-2007, 03:04 AM
| #2 (permalink) |
| MCB Member  Join Date: Apr 2006 Location: Monterey, CA    | Looks like something someone would have done in the days when the palmer paladin was the tournament setup of choice. Cool. If that was all soggy and way rotted looking people would mistake it for a really vintage setup. I dig it. Most vertical adapters made out of ASA's look like crap, by the way  |
|
| |
|
04-09-2007, 05:23 AM
| #3 (permalink) | |
| MCB Member  Join Date: Sep 2006 Location: New Jersey | Where did that RVA come from? III
__________________ Dr. Jack Barnes says: Science is not for pussies! Team Rogue Cell #14 Quote:
Don't be like me, ship things on time! | |
|
| |
|
04-09-2007, 03:11 PM
| #5 (permalink) |
| __________ Join Date: Jul 2006 Location: NE Ohio | Looks good. Do P-68s come with standard size holes for your macro line setup or did you drill and tap it? I'm planning on doing something similar with my Piranha LB but the hole into the valve is only big enough for a cocker barb. |
|
| |
|
04-09-2007, 03:20 PM
| #6 (permalink) |
| Red=Moderator  Join Date: Apr 2006 Location: Schen. NY | Drill and tap. The hole for the fitting is something like 10/32 but is a hollow screw and banjow bolt type assembly. To add a standard macro/micro or brass fitting you need to drill and tap for 1/8 NPT. It's not hard to do... ask questions if you need to. E
__________________ Gone fishing |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
