Need solid spyder valve pin

ThePBMinistry · 05-03-2007, 03:12 PM

I am looking for a spyder valve pin that has no relief on it, just a solid pin to keep the gas out of the striker chamber. used to come with the dragun one kit but I am sure there were other markers that made use of it. can anyone help me out?

Azzy · 05-03-2007, 03:18 PM

Im not sure, but isnt that the same as a cocker cup seal?

Maybe one for the wrath would fit.

ThePBMinistry · 05-03-2007, 03:23 PM

I have no clue here someone would have to check it out if they had a spyder pin and a cocker pin...

Deus Machina · 05-03-2007, 03:29 PM

'cocker pins are much thinner. A smooth pin is easy enough to make, though.

ThePBMinistry · 05-03-2007, 03:38 PM

easy enough if you have the tools and material,,, I don't.

This is for a project I have had on my mind for a long time.
I have most of the parts but still need this pin

Deus Machina · 05-03-2007, 03:42 PM

Right, right. Silly me.

If you can't find one, I could get you a stainless one. Not as tough as the usual case-hardened ones, though, I'm afraid.

quick.spyder · 05-03-2007, 03:55 PM

You could use a intimidator valve pin aka a poppet.

ThePBMinistry · 05-03-2007, 03:57 PM

Stainless would work fine, this marker wont see excessive use so stainless would work. I just want to get this thing up and running asap, and will bring it to pump pandemonium

Deus Machina · 05-03-2007, 04:26 PM

Ahhh, a pump Spyder. Let me see if I can yank the valve and such from my own for measurements.

ThePBMinistry · 05-03-2007, 04:28 PM

Pump spyder clone with a wicked little twist

05-03-2007, 03:12 PM	#1 (permalink)
ThePBMinistry Rec Poster Join Date: Apr 2007	Need solid spyder valve pin I am looking for a spyder valve pin that has no relief on it, just a solid pin to keep the gas out of the striker chamber. used to come with the dragun one kit but I am sure there were other markers that made use of it. can anyone help me out? __________________ Gunnin for 20 years and a little green monster called the Splatmaster started it all..... Know your roots! Dont mess with the Drill Sergeant http://www.prayhardpaintball.com Airow Gun Paintball Factory Rep

05-03-2007, 03:18 PM	#2 (permalink)
Azzy Mod-O-Rator Join Date: Mar 2006 Location: Finleyville, PA	Im not sure, but isnt that the same as a cocker cup seal? Maybe one for the wrath would fit. __________________ Bryan "Azzy" Spiegel Riverside Renegade Paintball / C.C. S.V.S. Plankowner - LPPC#6 "It is my right to be uncommon—if I can. I seek opportunity—not security. I do not wish to be a kept citizen, humbled and dulled by having the state look after me. I want to take the calculated risk; to dream and to build, to fail and to succeed. I refuse to barter incentive for a dole. I prefer the challenges of life to the guaranteed existence; the thrill of fulfillment to the stale calm of utopia. I will not trade freedom for beneficence nor my dignity for a handout. I will never cower before any master nor bend to any threat. It is my heritage to stand erect, proud and unafraid; to think and act for myself, enjoy the benefit of my creations and to face the world boldly and say, “This I have done.” - Dean Alfange

05-03-2007, 03:23 PM	#3 (permalink)
ThePBMinistry Rec Poster Join Date: Apr 2007	I have no clue here someone would have to check it out if they had a spyder pin and a cocker pin... __________________ Gunnin for 20 years and a little green monster called the Splatmaster started it all..... Know your roots! Dont mess with the Drill Sergeant http://www.prayhardpaintball.com Airow Gun Paintball Factory Rep

05-03-2007, 03:38 PM	#5 (permalink)
ThePBMinistry Rec Poster Join Date: Apr 2007	easy enough if you have the tools and material,,, I don't. This is for a project I have had on my mind for a long time. I have most of the parts but still need this pin __________________ Gunnin for 20 years and a little green monster called the Splatmaster started it all..... Know your roots! Dont mess with the Drill Sergeant http://www.prayhardpaintball.com Airow Gun Paintball Factory Rep

05-03-2007, 03:57 PM	#8 (permalink)
ThePBMinistry Rec Poster Join Date: Apr 2007	Stainless would work fine, this marker wont see excessive use so stainless would work. I just want to get this thing up and running asap, and will bring it to pump pandemonium __________________ Gunnin for 20 years and a little green monster called the Splatmaster started it all..... Know your roots! Dont mess with the Drill Sergeant http://www.prayhardpaintball.com Airow Gun Paintball Factory Rep

05-03-2007, 03:55 PM	#7 (permalink)
quick.spyder Active Member Join Date: Sep 2006 Location: Greenville, NC	You could use a intimidator valve pin aka a poppet.

05-03-2007, 04:28 PM	#10 (permalink)
ThePBMinistry Rec Poster Join Date: Apr 2007	Pump spyder clone with a wicked little twist __________________ Gunnin for 20 years and a little green monster called the Splatmaster started it all..... Know your roots! Dont mess with the Drill Sergeant http://www.prayhardpaintball.com Airow Gun Paintball Factory Rep Last edited by ThePBMinistry; 05-03-2007 at 04:37 PM..

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search