|
             |
 |
|
| Custom Projects / Custom Questions How do I customize? What do I customize? What do I use? Share you experiences and faults here! |
 |
| | LinkBack | Thread Tools | Search this Thread |
05-07-2007, 10:37 AM
| #1 (permalink) |
| Post Whore  Join Date: Apr 2006 | barbs and tapping for them I need to tap for a barb, however I hear there are numerous types of barbs. some say there are 3 main types with five being common though. I am told the threading is in three general sizes, with some having different exteriors hence the five types. So what I need is the most common size for a barb and suited tap. I can always go with using macro and a standard reg that does sub 100 PSI. This is not entirely a paintball project. |
|  |
|
05-07-2007, 10:42 AM
| #2 (permalink) | |
| Seasoned Member  Join Date: Mar 2006 Location: Milwaukee Wisconsin | 10-32 is a common thread size and barbs are available for them. I use that size because the taps are easy to come by and you can plug holes with screws that you probably have on hand. 10-32 barbs work out to be on the larger end of the spectrum so you can get better flow but they tend to take up a bit of space. If you head on over to Air Soldier you can look around at what is commonly available: http://www.airsoldier.com:8080/cgi-b..._Code=FITTINGS
__________________ Quote:
 | |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
