mcarterbrown.com  

Custom Projects / Custom Questions How do I customize? What do I customize? What do I use? Share you experiences and faults here!

Reply
 
Thread Tools Search this Thread
Old 08-27-2011, 01:07 PM   #11 (permalink)
Ask me about my
 
Skibbo's Avatar
 
Join Date: Oct 2009

Quote:
Originally Posted by Rainman229 View Post
Not enough volume in an ion to pop 2 balls out. My design has around 2 cubic inches of air in the valve chamber. When an ion has about 1 cu inch.
What about putting two ions side by side? I know it'd be somewhat wider than with a custom valve, but it could make the build significantly easier. Plus if you did the over under version, width wouldn't matter as much, since then it would be a matter of how tall you'd want it to be.
__________________
Quote:
Originally Posted by heinous View Post
i find this easy to masturbate to
Designer of the first legit looking ego pump, the EgoP!
BUY IT HERE!!


Tinkerer/ Pump lover
Team Akkadian Paintball Squad
OK D-Day '09 - German 716th IR
FEAR THE TREES!
Feedback:
http://www.mcarterbrown.com/forums/f...ml#post1067010
Skibbo is offline   Reply With Quote
Old 08-27-2011, 01:08 PM   #12 (permalink)
Born again
 
mustangii's Avatar
 
Join Date: May 2006
Location: Warrensburg MO
Send a message via AIM to mustangii

or used 2 ion valves? opps too slow, :lol:
__________________
Will no longer be selling anything outside of North America

ASE certifed master tech
Master Certified Chrysler Tech
mustangii is offline   Reply With Quote
Old 08-27-2011, 01:23 PM   #13 (permalink)
Official LL5 Dolphin-Dive
 
PistolRogue's Avatar
 
Join Date: Jan 2009
Location: Jackson, NJ
Send a message via AIM to PistolRogue

Over/under with a two stage trigger or a separate trigger for each barrel would be absolutely awesome... Olympia anyone?
__________________
Jay AKA Rogue Reservoir Dogs Scenario Paintball Team- Our $#&* is RIGOROUS!
My Gear For SALE!
Check Out My Mod Threads : Pirate DSG - SA17 Mods - Simple/Cheap/Free TPX Mods - The 'Big Damn Hero' DRV
FEEDBACK
PistolRogue is offline   Reply With Quote
Old 08-27-2011, 06:03 PM   #14 (permalink)
done
 
Join Date: Apr 2006
Location: nj
Send a message via AIM to Rainman229

the Back section is the valve. The last posted picture shows a 2d of the inside. It would be multiple parts that would assemble in to one.

Setting up a duel valve option would probably be easier to build. Two stage trigger shouldn't be that hard.

Using an Ion is not an option. Would only bring the cost up If anything.
__________________
Email lastone75@aol.com

Making paintball fun again

feedback http://www.mcarterbrown.com/forums/s...ght=rainman229
Rainman229 is offline   Reply With Quote
Old 08-27-2011, 09:12 PM   #15 (permalink)
Back sorta I guess
 
ComradeBenedict's Avatar
 
Join Date: Nov 2009
Location: Darien, Illinois

CCM Fan
Quote:
Originally Posted by crazyorigin View Post
What type of funding would be necessary? I was thinking this could probably be done for pretty low budget using something like an ION as the valve body, threaded into the hinged break action front end, cocker threaded breaches, sold w/o barrels.
Also am curious.
__________________
Feedback
^^Feedback. Do it.^^

If you are what you eat, then isn't cannibalism the way to go?

Quote:
Originally Posted by Mar View Post
barrels are like women - everyone likes them for their subtle differences and personal preferences. ALthough at this price, they cost substantially less than women.

(caution: barrels are not like women, do NOT insert your p3nis into a barrel)
ComradeBenedict is offline   Reply With Quote
Old 08-29-2011, 10:10 PM   #16 (permalink)
MCB Member
 
mpsd's Avatar
 
Join Date: Sep 2006
Location: Brazil

CCM Fan
Looks like the composite gun built by John Malkovitch on the 1993 movie In The Line of Fire:



I'm curious to see the end result.

About it's firing mechanism, have you thought of a Nelson valve with two internal chambers, two power tubes and two hammers being pushed forward against a spring and being held on the front by a couple of sears taht when released, would allow the hammers to go back against the power tubes's bases? That would make it more "manual" but would be exactly like the movie's gun. LOL At least it would be pretty easy to maintain and service.

Last edited by mpsd; 08-29-2011 at 10:17 PM.
mpsd is offline   Reply With Quote
Old 08-30-2011, 04:06 AM   #17 (permalink)
done
 
Join Date: Apr 2006
Location: nj
Send a message via AIM to Rainman229

My thoughts were fewer moving parts the better. Can always do duel spool's. Might be a tad longer.

But would be better then using a ion. Ions would need a new spool and a seat for it work as well as something at the rear for an air port. So why bother with making some work with what your building if its not going to be plug and play. Better off making what you need.


Cost of building one still working on that as I don't have all the details I need on the hinge setup. I have the basic idea of it . Just haven't been able to get the details done on paper yet.
__________________
Email lastone75@aol.com

Making paintball fun again

feedback http://www.mcarterbrown.com/forums/s...ght=rainman229
Rainman229 is offline   Reply With Quote
Old 09-02-2011, 04:26 AM   #18 (permalink)
done
 
Join Date: Apr 2006
Location: nj
Send a message via AIM to Rainman229

Well did the math on making these. If your really interested in seeing a few made and Want one and are willing to invest or pre order one (how ever you want to see it)
I would say i would need at least 2 people possibly 3. Pm me if your sure you would want. don''t contact me just to see how much. wasting my time is also wasting yours..

But anyways. I figured i could build these for around $300 to $400 each (not invested or preorder price) that would include the materiel and my time for a build. But would not include stock or frame as well as reg. Those would be extra since they won't be built by me. I may make a frame for them but un certain on how go with that at the moment

edit
If you decide to contact me. For the quote of whats needed to make this happen. I will divide it by 2 or 3. Any more and would not be able to give you one for your time, money, and patients invested. So for your contribution you will be receiving one.
__________________
Email lastone75@aol.com

Making paintball fun again

feedback http://www.mcarterbrown.com/forums/s...ght=rainman229

Last edited by Rainman229; 09-02-2011 at 04:46 AM.
Rainman229 is offline   Reply With Quote
Old 09-02-2011, 09:31 AM   #19 (permalink)
done
 
Join Date: Apr 2006
Location: nj
Send a message via AIM to Rainman229

Think divide by 3 is the best choice
__________________
Email lastone75@aol.com

Making paintball fun again

feedback http://www.mcarterbrown.com/forums/s...ght=rainman229
Rainman229 is offline   Reply With Quote
Old 09-02-2011, 02:08 PM   #20 (permalink)
MCB Member
 
Spider!'s Avatar
 
Join Date: Dec 2008
Location: Houston, TX

Quote:
Originally Posted by Rainman229 View Post
I don't have all the details I need on the hinge setup. I have the basic idea of it . Just haven't been able to get the details done on paper yet.
This is where I get hung up (without a mill). It reminds me of a pneumag. You get all caught up in the valves and actuators, but it's finding a good spot for the LPR and the hoses that makes it look right. A good hinge and breech will be important on a shotgun style marker.
__________________
My Feedback
Spider! is offline   Reply With Quote
Reply

  mcarterbrown.com » Custom » Custom Projects / Custom Questions

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 09:43 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC