|
             |
 |
|
| Custom Projects / Custom Questions How do I customize? What do I customize? What do I use? Share you experiences and faults here! |
 |
| | LinkBack | Thread Tools | Search this Thread |
08-27-2011, 12:35 AM
| #1 (permalink) |
| Airsmith to the Gods Join Date: Apr 2006 Location: nj  | Double barrel break breach
The other thread about break breach got me thinking on the idea again. I figured spool valve is the best idea for a bolt less setup. Here's a few screen shots of what i came up with. (I probably won't be building one as funds for my projects are slim to none. But don't meani can't toy with ideas.)   vertical version   2d of inside the valve 
__________________ Email lastone75@aol.com  Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229 Last edited by Rainman229; 08-27-2011 at 03:10 AM. |
|  |
|
08-27-2011, 08:26 AM
| #5 (permalink) |
| Airsmith to the Gods Join Date: Apr 2006 Location: nj |
I'll build it if someone wants to fund it. 
__________________ Email lastone75@aol.com Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229 |
|
| |
|
08-27-2011, 08:37 AM
| #6 (permalink) |
| .67cal Buwwets!  Join Date: Mar 2008 Location: Central Southern Upstate NY  |
What type of funding would be necessary? I was thinking this could probably be done for pretty low budget using something like an ION as the valve body, threaded into the hinged break action front end, cocker threaded breaches, sold w/o barrels.
|
|
| |
|
08-27-2011, 08:57 AM
| #7 (permalink) |
| Airsmith to the Gods Join Date: Apr 2006 Location: nj |
Not enough volume in an ion to pop 2 balls out. My design has around 2 cubic inches of air in the valve chamber. When an ion has about 1 cu inch.
__________________ Email lastone75@aol.com Making paintball fun again feedback http://www.mcarterbrown.com/forums/s...ght=rainman229 |
|
| |
|
08-27-2011, 09:05 AM
| #8 (permalink) |
| .67cal Buwwets! Join Date: Mar 2008 Location: Central Southern Upstate NY |
Did you design an entirely new valve assembly? It would also be pretty slick to see this simly milled to take cocker lower tube components and accept cocker frames, I would love to see a over/under that would take a cocker frame, would be the most bad *** pistol out there.
|
|
| |
|
08-27-2011, 11:58 AM
| #9 (permalink) | |
| Ask me about my  Join Date: Oct 2009 |
I've been designing a single shot break open dueling pistol since i was inspired by the historical paintball post, but I was going to use goblin shells. something like this would be way more awesome.
__________________ Quote:
BUY IT HERE!! Tinkerer/ Pump lover Team Akkadian Paintball Squad OK D-Day '09 - German 716th IR FEAR THE TREES! Feedback: http://www.mcarterbrown.com/forums/f...ml#post1067010 | |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
