Custom

[RAZRBAKK]

Alright, so a couple weeks ago I got a trilogy pump in a trade, and I have fallen in love. I really wanna do something cool that will make it mine, though.

I'm thinking about mid-blocking it, but I know nothing about this. How hard would this procedure be, and would it be better to ship it off to someone who knows what they're doing.

Also, is it possible to MQ one of these? I love the idea of only chambering a ball when playing pump.

Fill me in!

[Dysturbed87]

It is probably best to send to someone that knows what needs to be done and how to do it. They can be mq'd if you can get your hands on a 11/16 valve mq. If you can then you will probably pay a good bit for it though

[Leafy]

Make the mq decision before you mid block. If you do both at once you can leave the bottom tube closed off.

[RAZRBAKK]

I'm currently searching for the MQ valve. The mid-block would be done later.

[super_stanchy]

finding the 11/16 mq is gonna be tricky
they are hard to find

me and jcurtt and uhhh hcml? do midblocking

if you want to put a stock lower tube back in, then the body and hammer need to slotted

if its gonna stay mq'd for the rest of its life, then the body and hammer do not need to me slotted

[Leafy]

Dont they still sell the 11/16th new?

[super_stanchy]

Originally Posted by Leafy

Dont they still sell the 11/16th new?

show me where, i need one

[Leafy]

****, I guess not. Cant you just make your own? You can make a whole one on a lathe if you buy a clapper noid.

[super_stanchy]

Originally Posted by Leafy

****, I guess not. Cant you just make your own? You can make a whole one on a lathe if you buy a clapper noid.

but then i have to figure out the seals and all that junk...thats a PITA
i have to make a 3/4" valve/hammer too, for a mech cockeresque build... and i havnt done it!

[RAZRBAKK]

Originally Posted by super_stanchy

finding the 11/16 mq is gonna be tricky
they are hard to find

me and jcurtt and uhhh hcml? do midblocking

if you want to put a stock lower tube back in, then the body and hammer need to slotted

if its gonna stay mq'd for the rest of its life, then the body and hammer do not need to me slotted

It'll probably stay MQ'd for the rest of it's life.

Now stanchy, if I were to send it to you, with a standard MQ valve, would you be willing to spend the time doing a mid-block, and making a sleeve for the valve?

That would make this a whole bunch easier to get it done in one sweep.