Custom

[minion]

so i was looking at my old spyder e-imagine, and the way it shoots is the circuit board makes a noid push the sear to where the hammer can go forward. heres the noid that it uses: spyder noid. now, I was thinking, what if I used a spyder noid and sear to trigger the hammer, and use another guns frame and board to operate the gun? it seems like it would be an easy way to make an electrococker. (im thinking of doing this to a pump cocker, so i dont need to worry about the gun needing to auto-cock, just need it to shoot after i pump it.) i was also thinnking that if i used the hinge frame i have for it, i could mount a board in it and then put a different trigger in it, and mount the solenoid to trip the sear.

really would like to do this or find a way to do this, i already have all the parts in the diagram i attached (its from the spyder e-imagine manual), just need to know if/how i could do this.

[russc]

The Hyperframe works almost exactly like what you're describing, except it moves the 4-way valve as well as tripping the hammer, using a clapper noid.

[Skibbo]

it would come down to compatibility of the solenoid and the board, but if you kept the solenoid with the spider board and then put that in a different frame, I would think that would work, as long as everything fit and it would indeed actuate the sear.

[minion]

glad to hear it will work! my spyders just been laying around, and ive been wanting to do something to my cocker. once i do this, i will have to post pics

[philosophia]

I believe the Trilogy SF frames do the same thing you are talking about.

And why would you put it on a pump? If the sole purpose of the frame on the pump is to trip the sear, why not use an actual Autococker e-frame.

[minion]

Originally Posted by philosophia

I believe the Trilogy SF frames do the same thing you are talking about.

And why would you put it on a pump? If the sole purpose of the frame on the pump is to trip the sear, why not use an actual Autococker e-frame.

because I dont have the money for an actual one, as complete they are around $150, and I have several low-mid end electros just laying around that I can do this to, and this will make it a lighter, more comfortable frame and gun, yet be just as effective.

[K_Obeastly]

hyper frame is around 40 but this seems just as worth while/ Just have to get the frame holes drilled out to match the sear location up, flatten the top of the frame and maybe shorten it a bit.