Diadem ITS Mods

DiademITS · 07-22-2007, 04:44 PM

Diadem ITS Mods - ideas, experiences, what works what doesn't?

i will be putting up pictures soon of my Diadem..

I am in the process of putting an autococker tickler on my ITS.
Has anybody done this before?

if so:
what did you use to plug the hole that is left once you unscrew and put the little black line into the tickler (on the left side of the marker just above the regulator) i have a detonator on there also, not the stock reg. i have been looking for a pressure gauge but the hole is way too small for the standard size gauge.

any insight here?

Brhino · 07-22-2007, 06:22 PM

To plug the hole all you need is a short button cap 10-32 screw found at your local hardware store. I'm not familiar with the detonator, maybe someone else can help here because the only gauges I know of are 1/8 npt. You might want to check out pbn, they have an AM section and there is a sticky on modding the dits.

Shmavistime · 07-23-2007, 04:38 PM

I didn't mod mine, but it was an awesome gun, just couldn't afford to play with it. If you bought it off here or scp chances are it used to be mine. Did CockerPunk used to own it?

DiademITS · 07-27-2007, 02:34 PM

actually i got mine off ebay direct from AM.

i figured out how to mod it though and what to do.

very nice.. i'm going in a couple weeks, cant wait to use it.

DiademITS · 07-27-2007, 02:40 PM

i have used it a few times and it rapes thoroughly.. stopped playing for about a year and a half until now..

07-22-2007, 04:44 PM	#1 (permalink)
DiademITS Rec Poster Join Date: Jul 2007	Diadem ITS Mods Diadem ITS Mods - ideas, experiences, what works what doesn't? i will be putting up pictures soon of my Diadem.. I am in the process of putting an autococker tickler on my ITS. Has anybody done this before? if so: what did you use to plug the hole that is left once you unscrew and put the little black line into the tickler (on the left side of the marker just above the regulator) i have a detonator on there also, not the stock reg. i have been looking for a pressure gauge but the hole is way too small for the standard size gauge. any insight here?

07-23-2007, 04:38 PM	#3 (permalink)
Shmavistime Active Member Join Date: Jul 2006	I didn't mod mine, but it was an awesome gun, just couldn't afford to play with it. If you bought it off here or scp chances are it used to be mine. Did CockerPunk used to own it? __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

07-22-2007, 06:22 PM	#2 (permalink)
Brhino Rec Poster Join Date: Sep 2006 Location: So-Cal	To plug the hole all you need is a short button cap 10-32 screw found at your local hardware store. I'm not familiar with the detonator, maybe someone else can help here because the only gauges I know of are 1/8 npt. You might want to check out pbn, they have an AM section and there is a sticky on modding the dits.

07-27-2007, 02:34 PM	#4 (permalink)
DiademITS Rec Poster Join Date: Jul 2007	actually i got mine off ebay direct from AM. i figured out how to mod it though and what to do. very nice.. i'm going in a couple weeks, cant wait to use it.

07-27-2007, 02:40 PM	#5 (permalink)
DiademITS Rec Poster Join Date: Jul 2007	i have used it a few times and it rapes thoroughly.. stopped playing for about a year and a half until now..