|
             |
 |
|
| Custom Projects / Custom Questions How do I customize? What do I customize? What do I use? Share you experiences and faults here! |
 |
| | LinkBack | Thread Tools | Search this Thread |
08-01-2007, 12:47 AM
| #1 (permalink) |
| Active Member  Join Date: Nov 2006 Location: Michigan  | center feed trracer strikes again! Haven't posted in quite some time and thought I'd come back with a complete project. The trracer finally has a "stock". It was suggested by a friend to just get a cheap pellet or rubber band gun, and do a chop and drop. It's a small stock, but I like it, Especially since I have easy access to the safety.
__________________ If you can't learn to play well, then at least enjoy playing poorly. |
|  |
|
08-02-2007, 05:02 AM
| #2 (permalink) |
| Active Member  Join Date: Aug 2006 Location: California | Thats Pretty sweet. What type of stock is that?
__________________ Bomb Hills Not Countries Kick A$$ Customs We go what you need  "Well, I lost this finger playing paintball, and this one in an elephant stampeed, this one juggling rusty chainsaws,...... TriggerHappy's Feed Back |
|
| |
|
08-02-2007, 09:22 AM
| #3 (permalink) |
| Red=Moderator  Join Date: Apr 2006 Location: Schen. NY | Well... going by his post.. and having seen young children run around with them.... I'm guessing it's a rubber band gun. That style of rubber band gun is vrey nice, doesn't hold anything the 2"x4"s my dad and his friends used to use to launch strips of bicycle innertube at each other with (no wonder he took to paintball so quickly). Looks good. Now if you could give us a close up of the body so I can see what is up with the cocking slot bolt handle. E
__________________ Gone fishing |
|
| |
|
08-02-2007, 10:10 AM
| #4 (permalink) |
| Mod-O-Rator  Join Date: Mar 2006 Location: Finleyville, PA | How does that trigger setup work?
__________________ Bryan "Azzy" Spiegel Riverside Renegade Paintball / C.C. S.V.S. Plankowner - LPPC#6 "It is my right to be uncommon—if I can. I seek opportunity—not security. I do not wish to be a kept citizen, humbled and dulled by having the state look after me. I want to take the calculated risk; to dream and to build, to fail and to succeed. I refuse to barter incentive for a dole. I prefer the challenges of life to the guaranteed existence; the thrill of fulfillment to the stale calm of utopia. I will not trade freedom for beneficence nor my dignity for a handout. I will never cower before any master nor bend to any threat. It is my heritage to stand erect, proud and unafraid; to think and act for myself, enjoy the benefit of my creations and to face the world boldly and say, “This I have done.” - Dean Alfange |
|
| |
|
08-03-2007, 02:48 AM
| #5 (permalink) |
| Active Member Join Date: Nov 2006 Location: Michigan | Backyard Artillery is the stock I used. The double barrel version probably would have been a better choice. More room to work with. Trracer Center Feed for the slide I used a 1" pvc pipe. It attaches the same way as the original pump. The handle came from a arcade game pad, but will most like be replaced with something a bit smaller. The trigger turned out to be pretty easy. After removing the trigger guard I used the trigger from the rubber band gun to make an extension. A bit of epoxy and so far so good.
__________________ If you can't learn to play well, then at least enjoy playing poorly. |
|
| |
|
08-03-2007, 03:16 AM
| #6 (permalink) | |
| MCB Member  Join Date: Sep 2006 Location: New Jersey | Very cool! It actually looks good, for what you did with the trigger grouping. I would actually use that in a game!
__________________ Dr. Jack Barnes says: Science is not for pussies! Team Rogue Cell #14 Quote:
Don't be like me, ship things on time! | |
|
| |
|
|
| Thread Tools | Search this Thread |
|
|
