mcarterbrown.com  

Custom Projects / Custom Questions How do I customize? What do I customize? What do I use? Share you experiences and faults here!

Reply
 
Thread Tools Search this Thread
Old 05-07-2012, 12:39 AM   #1 (permalink)
Active Member
 
addicted2dunes's Avatar
 
Join Date: May 2012
Location: Orcutt, CA

WGP VF Tactical Build

Not sure if this is where I should post this one.... you can move it if needed.

I just scored on a nice NOS WGP Tactical body and front block. Been collecting parts for this build for a while now and have almost everything needed except the guards. I have drawn up the guards and will be CNC lasering them soon enough.

Parts Needed:
Trigger frame <---- Already have
Valve <---- Already have
Valve retainer <---- Already have
Hammer <---- Already have
Springs <---- Already have
IVG <---- Already have
Cocking rod <---- Already have
Front block tactical guard <---- Searching
Timing rod tactical guard <---- Already have
Ergo regulator <---- Already have
WGP tactical barrel kit <---- Already have
Beavertail <---- Already have
Trigger <---- Already have

Pics of collection so far:







__________________
ATOMIC FABRICATION
PM me about Autococker machining!

Last edited by addicted2dunes; 08-16-2012 at 11:29 AM.
addicted2dunes is offline   Reply With Quote
Old 05-07-2012, 12:40 AM   #2 (permalink)
Active Member
 
addicted2dunes's Avatar
 
Join Date: May 2012
Location: Orcutt, CA

Played with it a little tonight:





__________________
ATOMIC FABRICATION
PM me about Autococker machining!
addicted2dunes is offline   Reply With Quote
Old 05-07-2012, 12:46 AM   #3 (permalink)
Active Member
 
addicted2dunes's Avatar
 
Join Date: May 2012
Location: Orcutt, CA

One last pic for tonight....



I have to order the black cocking rod still.
__________________
ATOMIC FABRICATION
PM me about Autococker machining!
addicted2dunes is offline   Reply With Quote
Old 05-07-2012, 09:22 AM   #4 (permalink)
The cries of the carrots
 
Hogzilla88's Avatar
 
Join Date: May 2011
Location: Arlington, Tx

CCM Fan
Looks great!
Hogzilla88 is offline   Reply With Quote
Old 05-08-2012, 01:01 AM   #5 (permalink)
Active Member
 
addicted2dunes's Avatar
 
Join Date: May 2012
Location: Orcutt, CA

Guards drawn up and ready for the CNC laser, punch, and brake!

__________________
ATOMIC FABRICATION
PM me about Autococker machining!
addicted2dunes is offline   Reply With Quote
Old 05-08-2012, 01:23 AM   #6 (permalink)
Active Member
 
Join Date: Mar 2009

Haha I would've killed for that machine back when I had a tippmann a5 and was all into milsim shrouds. Looks like it's gonna be sweet.
__________________
My feedback
zeefoes is offline   Reply With Quote
Old 05-08-2012, 01:27 AM   #7 (permalink)
Active Member
 
addicted2dunes's Avatar
 
Join Date: May 2012
Location: Orcutt, CA

Quote:
Originally Posted by zeefoes View Post
Haha I would've killed for that machine back when I had a tippmann a5 and was all into milsim shrouds. Looks like it's gonna be sweet.
The machines are awesome, first is the CNC punch/laser. You lay the sheet out, then the punch comes in and punches all the holes, then the laser cuts the lines. Then you go off to the CNC brake that is +/- .005" in tolerance. Just hope I drew them up right
__________________
ATOMIC FABRICATION
PM me about Autococker machining!
addicted2dunes is offline   Reply With Quote
Old 05-10-2012, 10:28 AM   #8 (permalink)
Active Member
 
addicted2dunes's Avatar
 
Join Date: May 2012
Location: Orcutt, CA

Does anyone know what bolt is suppose to be in this Tactical? Orracle bolt? Evo bolt? Delrin? Totally confused now.

Any of these? I thought it was the one with yellow O-rings but then how does the bolt get ano'd on the back portion? So then I thought it was like the black magic bolt, center one. I dunno.

__________________
ATOMIC FABRICATION
PM me about Autococker machining!
addicted2dunes is offline   Reply With Quote
Old 05-10-2012, 01:40 PM   #9 (permalink)
imPump
 
erspimp03's Avatar
 
Join Date: Sep 2011
Location: BC, Canada

Unless I'm mistaken, all VF tactical colorways had a black delrin bolt, like either of the first two. Obviously delrin will not take anno, so if you want to match it you will have to use one of the metal bolts.

Cocker bolts came in 3 lengths, evo/pblock, 2k, and pre2k; the only difference is the distance from back block hole to tip. you are using a 2k back block and a full bodied cocker, so you will need a 2k bolt.. those all appear to be 2k, so you should be good to go.
__________________
MCB feedback
erspimp03 is offline   Reply With Quote
Old 06-01-2012, 01:43 AM   #10 (permalink)
Active Member
 
addicted2dunes's Avatar
 
Join Date: May 2012
Location: Orcutt, CA

Progress so far:





Cut and bent ALL the guards wrong! Damn it, round two to come:



At least the spacers are still good:

__________________
ATOMIC FABRICATION
PM me about Autococker machining!

Last edited by addicted2dunes; 06-01-2012 at 02:08 AM.
addicted2dunes is offline   Reply With Quote
Reply

  mcarterbrown.com » Custom » Custom Projects / Custom Questions

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump


All times are GMT -4. The time now is 04:29 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC