Custom Projects / Custom Questions How do I customize? What do I customize? What do I use? Share you experiences and faults here!

Thread Tools Search this Thread
Old 07-17-2012, 10:42 PM   #1 (permalink)
Join Date: Apr 2011
Location: Victoria, B.C. Canada

Gun Stand (Not PVC)

Got an idea a few days ago that...I was tired of holding my damned gun to load the hopper when off the field. I was tired of laying my Viking down on dirty tables, on old clothes, or having to resort to on the ground.

I needed a stand.

I looked online, laughed at the thought of buying one from someone when such a thing could be built easily.

I looked for plans online, and found nothing but plans for PVC rigs that were cumbersome, bulky, and screamed things I didn't want my stand screaming.
I wanted mine to look like I bought it. I wanted mine to be easy to take apart, easy to stow, and the kicker: Work with my Viking whether I am running my remote line or not. Quick! Find a stand that does both! I was also interested in using a different material than what is commonly used. As a learning experience for whenever I get off my gluttonous posterior and make my own computer case. So, I chose Acrylic.

So, I learned me some Sketchup, and made this:

Couple days later I bought some 6mm acrylic off-cuts from the local plastic supply place, and today I made this:

It isn't quite perfect. I found that I had picked up extruded acrylic, which is crap to machine/work with. It melts, gums up, turns into chunks, and makes a mess of itself. I also made an error in a cut and made a slot a little too wide, thus needing to cut another slot at the front of the stand. It isn't actually blue acrylic, it is the protective film that is still on it as I have a few points that I still need to smooth out.

Yes, it is stable. Yes, it is holding up a half-milled 03 Viking, a 88ci tank, and an empty rotor. It resists tipping to the front or rear, and the marker is held firmly in place. The back extensions were initially were to be mask hangers, but turns out it is too short for that.

There is some side-to-side wobble that I may look into fixing with angling my uprights on my next attempt.
Goldmarble is offline   Reply With Quote
Old 07-17-2012, 11:08 PM   #2 (permalink)
Seasoned Member
Christacular's Avatar
Join Date: Sep 2010
Location: Los Angeles, CA

I never thought about making a stand like that. Very cool! If your able to keep the gun from tipping with no tank and a full rotor, that would be VERY impressive
Christacular is offline   Reply With Quote
Old 07-18-2012, 01:18 AM   #3 (permalink)
Ornamental redneck
taco's Avatar
Join Date: Feb 2007
Location: lbc

Brass N Wood Fan
Palmers Fan
Pretty neat what did you use to cut it?

taco is offline   Reply With Quote
Old 07-18-2012, 01:31 AM   #4 (permalink)
Join Date: Apr 2011
Location: Victoria, B.C. Canada

Originally Posted by taco View Post
Pretty neat what did you use to cut it?
Tools used so far:
Table Saw
Dremel with sanding bit

Update: While making a video demonstration to see how stable it is with tank, and without, I found two current flaws:

The first is possibly an easy fix, or possibly going to need me to make an extra part. When loading the hopper with the tank off, the marker does get top heavy and wants to rotate. Possible fix: The upright under the front of the marker has a channel sanded into it that isn't wide enough for the marker to fit down into. When I get it ground down to proper fit, it might fix the problem, but it won't be very stable.

Definite fix is to make a new bridge piece to span the front and rear cross members to locate the ASA.

Second flaw was that I made the top cross member too thin. When taking the stand apart, the top cross member snapped where I had cut out material to make the interlock joint. Will need to make a thicker piece tomorrow. Weakness may have been exaggerated by this weaker extruded Acrylic.

Last edited by Goldmarble; 07-18-2012 at 02:08 AM.
Goldmarble is offline   Reply With Quote
Reply » Custom » Custom Projects / Custom Questions

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Forum Jump

All times are GMT -4. The time now is 06:00 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO
© MCB Network LLC