|Custom Projects / Custom Questions How do I customize? What do I customize? What do I use? Share you experiences and faults here!|
| ||Thread Tools||Search this Thread|
|11-19-2012, 04:01 PM||#11 (permalink)|
Join Date: Oct 2008
Location: Calgary - Canada
Yea it will be into aluminum. I have another asa to compare with.
I will show you the project when I am finished.
Now just have to wait for the tap to be delivered. About a week or so
I have only had this lathe for about 2 months setup. I am finding lots of stuff to make.
M. Carter Brown FEEDBACK
|11-19-2012, 04:24 PM||#12 (permalink)|
Join Date: Dec 2008
Location: Houston, TX
This is what sent me to Bacci to get an old ASA to thread (on the outside). What are the odds that the cheap tap is cheap in the right direction? That would be nice to have an ASA tap.
some things are stickier than others
|11-20-2012, 12:27 PM||#14 (permalink)|
Slowly making progress
Join Date: Apr 2008
Location: Vail, AZ
I would also suggest a die. Run that over what you are threading into the ASA if you can because I have found that not all paintball things intended to go into an ASA will fit something tapped with an 1/2-NPS tap.
|Thread Tools||Search this Thread|