|Custom Projects / Custom Questions How do I customize? What do I customize? What do I use? Share you experiences and faults here!|
| ||Thread Tools||Search this Thread|
|01-21-2013, 09:46 AM||#1 (permalink)|
Join Date: Mar 2012
Modifying at P68AT to use BT feednecks
Hello all. I have a P68AT in my collection, but alas, no hopper or elbow. I was wondering if anyone has ever tried to solder/j.b. weld some rails along the top tube and retrofit a BT feedneck/feed tube? I know I could just use a standard hopper and some PVC for an elbow, but the BT rail feed options just look so clean. Any ideas? Thanks everyone!
|01-21-2013, 02:42 PM||#2 (permalink)|
Join Date: Dec 2010
Location: Grand Ledge, MI
You could the only problem I see is that the top tube is round and there will be alignment issues. Your almost better off trying to use a standard 98C feed then a BT one though.
MCB Feed Back
|01-21-2013, 06:29 PM||#3 (permalink)|
Join Date: Sep 2011
Is it a 1" top tube with a 45* feed location? If so, you could bolt or glue (I read somewhere that a person used glue on an Automag if my memory is correct) an Empire Trracer picatinny rail on top of the top tube and use any of BT's feed options (spring feed, elbow, Rip Clip). It appears that the rail would have to be cut down to keep it from hanging off the back of your gun; but there would be several solutions to plugging that space left in the back in a pleasing manner.
|Thread Tools||Search this Thread|