|Custom Projects / Custom Questions How do I customize? What do I customize? What do I use? Share you experiences and faults here!|
| ||Thread Tools||Search this Thread|
|03-24-2013, 05:19 PM||#1 (permalink)|
Join Date: Feb 2011
Chrome plating removal trouble?? Need someone to do the work or tell me how
I have a empire axe body that was chrome plated and the chrome plating went into the back of body making it a little bit to small to fit the bolt guide back into the body! I need someone to help me remove it or point me into the correct direction to send it away to get worked on. I wanna keep the body chrome on the outside just need the little bit on the inside removed ??
Any help is greatly appreciated and if you want I'll get you pics
|03-25-2013, 12:27 AM||#2 (permalink)|
Join Date: Jun 2007
Location: Charleston, SC
pics would help a ton for whoever is trying to help you
I buy Automags and Parts: if you need cash shoot me a pm
|03-27-2013, 09:56 PM||#3 (permalink)|
Join Date: Jul 2007
I would use a hone to remove it until it fits.
Flex hone or cylinder hone both should work.
NEED ANODIZING SUPPLIES? CHECK ME OUT ON EBAY!
ADDING MORE SUPPLIES AS I CAN
NEED SOMETHING ANODIZED? CHECK ME OUT ON FACEBOOK!
|03-28-2013, 12:07 AM||#4 (permalink)|
Join Date: Jul 2009
Location: Beaver Falls PA (outside Pittsburgh)
if it came out it will go back in check for oring fits or something easy before you send it out to get honed.
My Feedback - http://www.mcarterbrown.com/forums/f...ml#post1575817
I also freak bore
A wise man once said:
"The gap between theory and reality is not as far in theory as it is in reality."
|03-29-2013, 04:55 PM||#8 (permalink)|
Big guy in a wig
Flex hone might do it.
|Thread Tools||Search this Thread|