Official Resurrection project photo posting thread

Robertsr · 10-01-2007, 11:32 AM

Please post your before and after photos. No more than 3 of each please. Once everyone who has had a chance to complete a project in September has posted we'll run the poll.

Robertsr · 10-01-2007, 11:43 AM

Here is my Badger resurrection:

From here

To here

There was a LOT of clean up involved. Luckily the actual mechanics of the marker seem to be pretty darn bulletproof. It fires just fine and always did, so this was a pile of cosmetic work.

The surface was heavily scratched and pitted on the whole marker, so there was power tool work that led to hand work that led to more hand work etc.. I finished the marker with Duracoat in kelly green and black. (I wanted a more emerald green, but kelly green is what came and I didn't have the time for another order.

The wood inserts are razor thin pieces of something I had laying around with a nice grain. They had to be custom fitted to each area of the gun as the sand casting leaves a lot to be desired for consistency.

This gun has all the original parts, even the original o-ring that seals the tube to the frame. It's a shockingly simple and robust design.

chplnstone · 10-01-2007, 06:12 PM

here ya go, before:

after:

also posted here: Official Custom/Restoration Pre 2-K Build-Off Rules thread

streamline d/f patch, left hand sidetap patch (it was on top of the serial number!), new ammo tube with springfeed and 'one-up' mod to get the last ball, filled in rough ball detent, swapped to original pump handle, and new furniture, carved from poplar with tattoos, pewter chaos symbol, and brass trigger guard (shaped from bluestreak pump tube) with many coats of wax...

HurtCow · 10-01-2007, 06:27 PM

^^^

Brewtt · 10-01-2007, 06:35 PM

You've both done fantastic jobs. Nicely done!

splattttttt · 10-01-2007, 07:36 PM

Quote:

Originally Posted by chplnstone

here ya go, before:
http://i195.photobucket.com/albums/z...ty/uglykp1.jpg

after:
http://i195.photobucket.com/albums/z...100_2817-1.jpg
http://i195.photobucket.com/albums/z...y/100_2821.jpg

also posted here: Official Custom/Restoration Pre 2-K Build-Off Rules thread

streamline d/f patch, left hand sidetap patch (it was on top of the serial number!), new ammo tube with springfeed and 'one-up' mod to get the last ball, filled in rough ball detent, swapped to original pump handle, and new furniture, carved from poplar with tattoos, pewter chaos symbol, and brass trigger guard (shaped from bluestreak pump tube) with many coats of wax...

For a second, I thought it got NASTIED. Does the twelvee get held in in a traditional stock twist?
Nice job on the stock and side tap spring feed.

A.C. Basbas · 10-01-2007, 07:55 PM

This was a nice eBay snag; $85 shipped for two valveless and thouroughly beaten upon PTP Micromags, valveless Classic Mag, a BooYaa and a bunch of extra PTP vertical adapters and old duckbills. Too bad the guy listed it so poorly

Anyway, the first job was to get the spraypaint off the body. It was easy, because the previous owner apparently started the job for me so that he could get a "fade" look... looks like hell, right? Anyway a few hours with a toothbrush and some nailpolish remover took care of it. I polished it down to get rid of all the nasty oxidation, then powdercoated it black. I'm not 100% happy with the final color, though, as I was trying to match my other "Sating Black" PTP MicroMags, and this one came out a bit gray. Then I threw on an old AA barrel, and bought a used RT Pro valve. The valve needed a full rebuild, but that was relatively easy with an AGD kit. Finally, I had the broken BooYaa frame, that with $15 worth of RadioShack parts became a 15bps ball slingin' machine

I then added an old vertical adapter, and stripped an old "Dead-On" cocker reg to make it a gasthru.

I can tell it isn't the prettiest thing that will be listed, or the most massively re-done, but I think I've done a pretty damn good job and I'm glad that people will get the chance to see it in all its glory

I don't think I can wait 'til next year for the other spraypainted Micro

:

chplnstone · 10-01-2007, 09:01 PM

Quote:

Originally Posted by splattttttt

For a second, I thought it got NASTIED. Does the twelvee get held in in a traditional stock twist?
Nice job on the stock and side tap spring feed.

thankee!, never patched a sidetap before, they drilled out most of the serial number when they put it in...and it is a traditional stock twist, didnt seem right to put a fasstchanger on just yet...insta-pierce works well, and the 'one-up' mod makes that 15th ball jump right into the barrel

put another 30 rds through it today

tymcneer · 10-01-2007, 09:40 PM

The complete blog style build can be read here.

It all started here... Missing pieces and all...

And ended up with this...

Robertsr · 10-02-2007, 08:17 AM

Stunningly good work all around gents! We'll wait another day or two for stragglers to post and then we'll have the voting.

10-01-2007, 11:32 AM	#1 (permalink)
Robertsr Ultimate Battle Monkey Z Join Date: Apr 2006 Location: Waynesboro, VA Posts: 2,952	Official Resurrection project photo posting thread Please post your before and after photos. No more than 3 of each please. Once everyone who has had a chance to complete a project in September has posted we'll run the poll. __________________ Geriatrically Assured Destruction

10-01-2007, 11:43 AM	#2 (permalink)
Robertsr Ultimate Battle Monkey Z Join Date: Apr 2006 Location: Waynesboro, VA Posts: 2,952	Badger Here is my Badger resurrection: From here To here There was a LOT of clean up involved. Luckily the actual mechanics of the marker seem to be pretty darn bulletproof. It fires just fine and always did, so this was a pile of cosmetic work. The surface was heavily scratched and pitted on the whole marker, so there was power tool work that led to hand work that led to more hand work etc.. I finished the marker with Duracoat in kelly green and black. (I wanted a more emerald green, but kelly green is what came and I didn't have the time for another order. The wood inserts are razor thin pieces of something I had laying around with a nice grain. They had to be custom fitted to each area of the gun as the sand casting leaves a lot to be desired for consistency. This gun has all the original parts, even the original o-ring that seals the tube to the frame. It's a shockingly simple and robust design. __________________ Geriatrically Assured Destruction

10-01-2007, 06:12 PM	#3 (permalink)
chplnstone bringing back the dead Join Date: Jan 2007 Location: pensacola, florida Posts: 866	Ugly kp here ya go, before: after: also posted here: Official Custom/Restoration Pre 2-K Build-Off Rules thread streamline d/f patch, left hand sidetap patch (it was on top of the serial number!), new ammo tube with springfeed and 'one-up' mod to get the last ball, filled in rough ball detent, swapped to original pump handle, and new furniture, carved from poplar with tattoos, pewter chaos symbol, and brass trigger guard (shaped from bluestreak pump tube) with many coats of wax...

10-01-2007, 06:35 PM	#5 (permalink)
Brewtt CHEERS! Join Date: Mar 2006 Location: Northern California Posts: 3,725	You've both done fantastic jobs. Nicely done! __________________ Dabbling in the recreational paintball arts since 1991.

10-01-2007, 07:55 PM	#7 (permalink)
A.C. Basbas Pants Mafia Join Date: Feb 2007 Location: Maynard, Massachusetts. Posts: 1,786	This was a nice eBay snag; $85 shipped for two valveless and thouroughly beaten upon PTP Micromags, valveless Classic Mag, a BooYaa and a bunch of extra PTP vertical adapters and old duckbills. Too bad the guy listed it so poorly Anyway, the first job was to get the spraypaint off the body. It was easy, because the previous owner apparently started the job for me so that he could get a "fade" look... looks like hell, right? Anyway a few hours with a toothbrush and some nailpolish remover took care of it. I polished it down to get rid of all the nasty oxidation, then powdercoated it black. I'm not 100% happy with the final color, though, as I was trying to match my other "Sating Black" PTP MicroMags, and this one came out a bit gray. Then I threw on an old AA barrel, and bought a used RT Pro valve. The valve needed a full rebuild, but that was relatively easy with an AGD kit. Finally, I had the broken BooYaa frame, that with $15 worth of RadioShack parts became a 15bps ball slingin' machine I then added an old vertical adapter, and stripped an old "Dead-On" cocker reg to make it a gasthru. I can tell it isn't the prettiest thing that will be listed, or the most massively re-done, but I think I've done a pretty damn good job and I'm glad that people will get the chance to see it in all its glory I don't think I can wait 'til next year for the other spraypainted Micro : __________________ -Dragon Brigade- wWw #32 WDP Angel Ir3 F/S/T! MCB Feedback -PbN FeedBack Last edited by A.C. Basbas; 10-01-2007 at 08:01 PM.

10-01-2007, 09:40 PM	#9 (permalink)
tymcneer MCB Member Join Date: Oct 2006 Location: Baltimore MD Posts: 422	Final KP pictures The complete blog style build can be read here. It all started here... Missing pieces and all... And ended up with this... __________________ I have brass tube and Autococker parts, Sovereign and F2 barrels, and more for sale. Visit BigEvilOnline My feedback: MCB - eBay - AO

10-02-2007, 08:17 AM	#10 (permalink)
Robertsr Ultimate Battle Monkey Z Join Date: Apr 2006 Location: Waynesboro, VA Posts: 2,952	Stunningly good work all around gents! We'll wait another day or two for stragglers to post and then we'll have the voting. __________________ Geriatrically Assured Destruction

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search