|Custom Projects / Custom Questions How do I customize? What do I customize? What do I use? Share you experiences and faults here!|
| ||Thread Tools||Search this Thread|
|06-24-2013, 05:48 PM||#11 (permalink)|
Join Date: Mar 2009
Location: Santa Cruz Mountains
Heres an original Ion breech and can member Tjd did for me awhile back,still saving it for a special project.
Front QEV/banjo port was rotated 180 deg,original port was plugged with a setscrew.The rear donut portion of the firing can on non BOB Ions swivels a full 360 deg.
Though I dont have an Enemy...yet,Im fairly sure the frame and mech valve will bolt up without serious modification other than a few new holes drilled and some new fittings and\or airlines if that.
Advantage of using the OG Ion breech would be the rotating rear donut and preexisting feedneck threads on the breech.You would have to give up the BOB option of the Enemy
Specops made a Longbow Ion body very similar to the Tac body also,Ive got 2 of them,heavy but nice,one is a DW\Yoda mech too
I'm not THAT Punisher!!
If a Dremmel had t*ts Id marry one!
|06-24-2013, 06:02 PM||#12 (permalink)|
Front QEV/banjo was rotated 180, not 90 degree? Boxmag project?
|06-24-2013, 06:33 PM||#13 (permalink)|
Join Date: Nov 2008
Location: East Mids, UK
Been done with ripclips and SP1s a lot.
Usually just a case of drilling a new feed hole and covering the old.
Obviously it's easier to cover the old breech with rails and a square body.
|Thread Tools||Search this Thread|