It's ready for anodizing

blackrain · 12-29-2007, 04:30 AM

Hvacman is on deck for the job. So which set up do you like? The freak tip,feed,body and pump/guide and snatch grip will be anodized, also the ANS frame and black ASA.The colors are silver with black and red sponge dust. Personally I think the slider takes away from this one. It doesn't flow well with the body.
Later,
Blackrain

Slider frame and chrome ASA:

Slider with black ASA:

ANS 90* with chrome ASA:

ANS 90* with black ASA:

Ir0nExpress · 12-29-2007, 05:10 AM

No slider. I'm with you on that one. But you can't use a 3.5oz if you dont use the slider.

Depends on gas source I guess, I assume you'll be using a reg. Still Like the ANS frame the best though.

blackrain · 12-29-2007, 06:11 AM

It's not all the way done. I still have to make a stock for it. I might put the 3.5 under stock. I may just 12 gram it too.
Later,
Blackrain

Azzy · 12-29-2007, 10:50 AM

Not a huge fan of how the snatch looks on there, looks way to "bolted on for the hell of it". Mayeb because it is thicker than teh gripframe, and doesnt touch the rear of the frame.

I do like the look of the 86 frame, and if you are going to stock it, then that may be your best bet.

It deserves a somewhat complicated looking stock through, plain jane tstock wont cut this one.

Drachen · 12-29-2007, 11:24 AM

What about getting an angled vert asa? I have the ANS 86* frame on a pump of mine and love it. With an angled asa you'd be able to get a 3.5 on it. And personally, I think the angle asa's would look a bit nicer/cooler on that specific marker.

Though as your original post, the ANS 86* frame, and black asa looks the best I think.

PaintYa · 12-29-2007, 11:39 AM

I like the ans frame as well with any of the configurations you have. It makes me want to get a cocker again

good luck

J.T

Delamorte · 12-29-2007, 01:04 PM

You're right, the slider just doesn't flow well with the body. The 86 looks much better, kinda gives it a mean look.

I'm also not terribly fond of the snatch grip, it just looks kinda strange hanging out there with no back block. Other than that, I think it's gonna be sharp.

Mar · 12-29-2007, 01:56 PM

I would just like to echo what others have said, the 90 degree frame looks nice, as does the rest of it. Can't wait to see it finished.

blackrain · 12-29-2007, 03:31 PM

90* it is then. This body just has to many waves. I think it does look nice on this body.
Thanks,
Blackrain

justakarni · 12-29-2007, 09:26 PM

this makes me sad those frames are hideous in a bad way but its yours so good luck

12-29-2007, 04:30 AM	#1 (permalink)
blackrain MCB Member Join Date: Apr 2006 Location: America	It's ready for anodizing Hvacman is on deck for the job. So which set up do you like? The freak tip,feed,body and pump/guide and snatch grip will be anodized, also the ANS frame and black ASA.The colors are silver with black and red sponge dust. Personally I think the slider takes away from this one. It doesn't flow well with the body. Later, Blackrain Slider frame and chrome ASA: Slider with black ASA: ANS 90* with chrome ASA: ANS 90* with black ASA: __________________ Rogue Leader and founder "TEAM ROGUE" Cell #0 "When all else fails,pull the pin and see what happens next" Just like to make crazy stuff for paintball? Click on the link: http://www.freepaintballplans.com/forum/ My feed back: http://www.mcarterbrown.com/forums/showthread.php?t=745 How Paintballs are made: http://video.google.com/videoplay?do...54640369281174 Last edited by blackrain; 12-29-2007 at 03:32 PM..

12-29-2007, 05:10 AM	#2 (permalink)
Ir0nExpress Kawaiii~~ SUGOI DESU NE?! Join Date: Apr 2006 Location: Staten Island/Stony Brook New York	No slider. I'm with you on that one. But you can't use a 3.5oz if you dont use the slider. Depends on gas source I guess, I assume you'll be using a reg. Still Like the ANS frame the best though. __________________ President of the SUNY Stony Brook Paintball Club. Pbreview Feedback MCarterBrown Feedback Automags.org Feedback

12-29-2007, 06:11 AM	#3 (permalink)
blackrain MCB Member Join Date: Apr 2006 Location: America	It's not all the way done. I still have to make a stock for it. I might put the 3.5 under stock. I may just 12 gram it too. Later, Blackrain __________________ Rogue Leader and founder "TEAM ROGUE" Cell #0 "When all else fails,pull the pin and see what happens next" Just like to make crazy stuff for paintball? Click on the link: http://www.freepaintballplans.com/forum/ My feed back: http://www.mcarterbrown.com/forums/showthread.php?t=745 How Paintballs are made: http://video.google.com/videoplay?do...54640369281174 Last edited by blackrain; 12-29-2007 at 06:34 AM..

12-29-2007, 10:50 AM	#4 (permalink)
Azzy Mod-O-Rator Join Date: Mar 2006 Location: Finleyville, PA	Not a huge fan of how the snatch looks on there, looks way to "bolted on for the hell of it". Mayeb because it is thicker than teh gripframe, and doesnt touch the rear of the frame. I do like the look of the 86 frame, and if you are going to stock it, then that may be your best bet. It deserves a somewhat complicated looking stock through, plain jane tstock wont cut this one. __________________ Bryan "Azzy" Spiegel Riverside Renegade Paintball / C.C. S.V.S. Plankowner - LPPC#6 "It is my right to be uncommon—if I can. I seek opportunity—not security. I do not wish to be a kept citizen, humbled and dulled by having the state look after me. I want to take the calculated risk; to dream and to build, to fail and to succeed. I refuse to barter incentive for a dole. I prefer the challenges of life to the guaranteed existence; the thrill of fulfillment to the stale calm of utopia. I will not trade freedom for beneficence nor my dignity for a handout. I will never cower before any master nor bend to any threat. It is my heritage to stand erect, proud and unafraid; to think and act for myself, enjoy the benefit of my creations and to face the world boldly and say, “This I have done.” - Dean Alfange

12-29-2007, 11:24 AM	#5 (permalink)
Drachen Custom User Title Join Date: Jan 2007 Location: Maplewood, MN	What about getting an angled vert asa? I have the ANS 86* frame on a pump of mine and love it. With an angled asa you'd be able to get a 3.5 on it. And personally, I think the angle asa's would look a bit nicer/cooler on that specific marker. Though as your original post, the ANS 86* frame, and black asa looks the best I think. __________________ Pumpker'd; (V.) When a pump player runs up and shoots you at point blank range because you thought 20bps made you good. BLARG! Feedback {+22/-0} PBN ~ MCB ~ Special Ops

12-29-2007, 11:39 AM	#6 (permalink)
PaintYa Active Member Join Date: Apr 2006	I like the ans frame as well with any of the configurations you have. It makes me want to get a cocker again good luck J.T __________________ "Dead man walking"-my paintball moto Riverside Renegades -Pittsburgh's Best Paintball Field Beer is living proof that God loves us and wants us to be happy. -Benjamin Franklin

12-29-2007, 01:04 PM	#7 (permalink)
Delamorte MCB Member Join Date: Apr 2006 Location: Collinsville, Illinois	You're right, the slider just doesn't flow well with the body. The 86 looks much better, kinda gives it a mean look. I'm also not terribly fond of the snatch grip, it just looks kinda strange hanging out there with no back block. Other than that, I think it's gonna be sharp. __________________ "OMG! Oh! - MY! - GOD! ... I've been playing over ten years and nobody ever told me I had to wear a cup! It's an outrage! A Conspiracy! Why didn't anyone tell me I could get shot in the balls! They hate my balls! Ten YEARS! Ahhhhhhhh! ... conspiracy" ~WilD

12-29-2007, 01:56 PM	#8 (permalink)
Mar I awesome and so can you! Join Date: Aug 2006 Location: 5,987 posts	I would just like to echo what others have said, the 90 degree frame looks nice, as does the rest of it. Can't wait to see it finished. __________________ "Everyone, this is Fred. It's his first time in prison and he's a little nervous. He used to be a police officer and then he molested a little boy, so make him feel welcome!" Randy

12-29-2007, 03:31 PM	#9 (permalink)
blackrain MCB Member Join Date: Apr 2006 Location: America	90* it is then. This body just has to many waves. I think it does look nice on this body. Thanks, Blackrain __________________ Rogue Leader and founder "TEAM ROGUE" Cell #0 "When all else fails,pull the pin and see what happens next" Just like to make crazy stuff for paintball? Click on the link: http://www.freepaintballplans.com/forum/ My feed back: http://www.mcarterbrown.com/forums/showthread.php?t=745 How Paintballs are made: http://video.google.com/videoplay?do...54640369281174

12-29-2007, 09:26 PM	#10 (permalink)
justakarni Active Member Join Date: Jan 2007	this makes me sad those frames are hideous in a bad way but its yours so good luck

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search